Question for frequent wheelers

[BlueHUMMERH2]

Wow, a lot of responses. Thanks for the input.

I try to drive sensibly for the most part. I found that the group of H2's on Saturday at Paragon drove like maniacs as far as speed was concerned...

My UCP is bent up into the exhaust, and it has sheared off one of the engine exhaust manifold bolts, which I have to have extracted and then replaced. Has to be the rear most bolt, which I can't easily access myself. The bolts are $.79 each, but the job will probably cost me $200....

So far I've avoided body damage. I have smashed the rocker rail on the drivers side, and smooshed a bushing on the sway bar in the rear. I don't want body damage (though I suspect it's only a matter of time), but I don't mind if I bang up the protection because that's why it's there.

But I'll keep an eye on the IFS. I have a feeling that some of the components in there are in need of replacement. Otherwise, the other components seem to be holding up. My rear suspension squeaks, but I think that's from the lower shock mount getting dirty (there is a TSB on this I think?) and my exhaust rattles from the aforementioned UCP impacts. The steering at low speeds is making a noise at some points and causing the steering wheel to vibrate. And when I come to a stop, there is a rattle of about 2 seconds a few moments before I come to a complete stop. I'm going in for inspection shortly, so I guess I'll have them look at everything and see if there are any parts I can try to replace on my own with my dad helping me.

Thanks for the input so far!