|
#25
12-19-2006, 05:02 AM
Hummer Professional
Join Date: Sep 2006
Location: Arkansas
Posts: 363
Re: Spring hanger/shock mount skid plate
Here is a fresh shot with one on and one off. The one that is on is the design that needs to be 1 inch wider towards the inside to protect the bolt head. They will both be wider. Im trying to say brand "A" was not wide enough and the radius on the back turned up part is more so as not to stick out as much. Anybody see anything else missing?? You can also see my added 3/8 by three inch strip I added under the Rocky Road rock rails. I posted a shot on the thread but will stick it in here.
__________________
Traded 06 I-5 for 08H3 ALPHA/Adv,WarnPowerPlant9500,Warn 9000ti rear,Steelcraft brush/winch mt,RockyRoadrails/Hunner mod,GMUCP,Hunner rear/shock skids,OEM roof lights,Rola rack,2GoLights,Hunner steering gear mount,Purple Cranium diff guard,BulletProof tie rods,ARBsnorkle, SyKlone prefilter,Hunner intake pipe.
Last edited by Hunner : 12-19-2006 at 05:12 AM.
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 03:42 AM.
Threaded Mode