SUT Tonneau Cover Install Instructions and Photos

[H2ummer]

Ok, Here are the Photos starting with a shot of the bed without it.




Remove the Torx Screw.



Remove the Torx Screw.



At this point the instructions have you pull the Sail back and install the weatherproofing. See Do First 1. If you do as I did, you will need to remove the top Torx and Marker Light.



Remove Light.



Remove light mount.



Move the Light and mount out of the way so you can take the Sail Panel off.



Pull Sail Panel Back. If you move it back very far it will break the retainer clips. I went ahead and removed it so I broke all 7 retainer clips and replaced them with new ones that I had ordered.