Re: questions for my lift....
In theory, yes. But remember, it's the travel you need to worry about, and your mounting points. For example, if you take a Bilstein 7100 series shock with 14" of travel and mount it in a fashion that you have 4" of compression and 10" of extension available, that might not fit what you need it to do.
I don't want to get too complicated here. Really, your best option might be to find others on here with the similar set-up you're after, and ask them to take measurements. Ideally, you'd want three measurements...static, extended, and compressed. But if you get at least the static measurement, you should be able to call a company like Bilstein, and they could help you out.
Sorry if this has made it too complicated.
__________________
White 2005 SUT, Lifted 7.5" via Fabtech/custom work, Fabtech Dirt Logic 2.25 shocks, 40x15.5x22 Toyo's, black 22" Fuel wheels, 4.88 gears, Dynatech long tube headers, Magnaflow exhaust, Air-raid intake, Superchips programmer, Edlebrock panhard bar, Cognito UCA's, Kryptonite tie rods, Cognito pitman/idlar arm gussets, Hotchkis swaybars and trailing arms, Amp Research steps, E&G fender flares, PIAA SMR's, smoked roof lights (bulbs removed), black suede headliner, 13" JL's under seat
|