Okay, let?s start this all over....

[OrangeCrush]

Originally Posted by adamw89_2000

my front end shop say they will not wear out as you speak of.. i asked same ? top them. they said they have never seen a vehicle with wore out torsions bars.. reason one is cranked more than the other is what is called the " chevy lean" every gm pickup has the same problem.. 2wd or 4wd apparently. im not sure why gm does this( maybe to compensate for the weight of gas tank and etc. ?)

For every GM that I've lifted, I have had this same thing happen. One bolt is always in more than the other.

The ironic part is out all the vehicles I have ever done, yesterday, I installed the torsion bars, cranked the bolts back in the same distance and the truck is the EXACT same height all the way around. Usually, one side is 1/2-3/4" lower than the other side. No measuring, no fuss, no muss, just bolt in and it worked perfect. (for once)

I did however back the bolts down 4 full turns and the truck rides better and didn't change in height at all.

Today I had an alignment and tonight I order my tires. After much discussion, measuring and thought, I have decided to go with the Toyo's again in 40".

They're great tires (though I would have liked to have a more aggressive look) and hopefully I won't have to trim anything. (keeping fingers crossed)

Mark