|
|
06-14-2006, 03:12 AM
|
|
Hummer Veteran
|
|
Join Date: Aug 2005
Location: Washington, DC
Posts: 141
|
|
Re: Just finished DOI skid plate prototype
Let me answer a few questions as best I can and then I will find some more pictures to post.
1. Weight. All 3/16" steel construction results in a heavy, but extremely strong product. I'm going to take the plates down after testing them and I will let everyone know the weight of both the front and back plates. I noticed absolutely no performance hit. I got 18 mpg on my trip out (70-85mph, no A/C ) and 18 mpg on my way back with new winch bumper and skids attached. In addition -- and this is probably just in my head -- on the way back, the engine seemed to struggle less in 5th gear at speeds between 75 and 90 when passing (is it downhiil from IN to DC? )
2. Heat. There is no doubt this is a concern of mine and I've asked f5fstop if he can get me some benchmarks. What I know so far is that if you start up your H3 on a cold morning and drive it a mile and then feel the tranny, or diffs, or exhaust they are hot - damn hot. After I got home from driving 10 hours I spent a few minutes underneath my truck and came to the same subjective conclusion - hot (damn hot). Nothing, of course, was glowing red, and no overt signs of overheating (such as burning smells, etc.). I take some comfort in the fact that I've got a manual transmission and that all the heat from the catalytic converter and much of the exhaust is not enclosed. I will probably have my fluid flushed and checked in about 2-3k miles to get some objective feedback. A tranny temp guage isn't a bad idea but I've never seen one on a manual, and without benchmarks the data isn't terribly helpful. It's clear at this point that the heat issue isn't acute and the real issue is whether temps are being raised moderately to a degree that would breakdown fluid at an accelerated rate over the long run. I think that's probably the case for anyone that does heavy wheeling and can be taken care of with more frequent fluid changes.
3. Mud. Like the heat issue, I can only speculate at this point. One school of thought is that large amounts of mud will get trapped and create more severe heat issues. Another possibility is that the plates will do a better job of keeping mud out and away from the components that really matter. I think it really depends on the terrain. I will report back -- the idea is that it's always easier to drill more holes later if it's a problem.
__________________
Birch White H3 Manual, Adventure Package, Sunroof, Trailering Package, Off-Road Lamps, Splashguards, Black Tubular Assist Steps, Black Crossbows, Mudder Mats, Ski Rack, Warn XD9000 w/ DOI Hawse Winch Bumper, DOI Prototype Skid Plates, M101A1 3/4 ton trailer.
|
06-14-2006, 03:32 AM
|
|
Hummer Veteran
|
|
Join Date: Aug 2005
Location: Washington, DC
Posts: 141
|
|
Re: Just finished DOI skid plate prototype
__________________
Birch White H3 Manual, Adventure Package, Sunroof, Trailering Package, Off-Road Lamps, Splashguards, Black Tubular Assist Steps, Black Crossbows, Mudder Mats, Ski Rack, Warn XD9000 w/ DOI Hawse Winch Bumper, DOI Prototype Skid Plates, M101A1 3/4 ton trailer.
|
06-14-2006, 03:34 AM
|
|
Hummer Guru
|
|
Join Date: Nov 2005
Location: rollin with Beebs & F5
Posts: 5,546
|
|
Re: Just finished DOI skid plate prototype
sounds like you got all the bases covered , just keep an eye on that temp
__________________
GREEN no BLING , LINE-X & 35's , Adv. , monsoon & some other crap too
Hangin with my HOABies , Bling is cool but HOABies RULE!!!!
Black Sheep Hummer Squadron / camp no due's & no dont's
* Rollin with the Banned and the Damned *
"Fred Thompson for President "
|
06-14-2006, 03:38 AM
|
|
Banned
|
|
Join Date: Aug 2005
Location: Chapin, South Carolina
Posts: 1,943
|
|
Re: Just finished DOI skid plate prototype
BJC,
How soon do you plan to "test" it? Like others, I'm interested on the results.
Looks damn good to me...(but, then again...I like to break my sh!t! )
|
06-14-2006, 04:18 AM
|
Hummer Guru
|
|
Join Date: Jul 2005
Location: nonpiker
Posts: 5,900
|
|
Re: Just finished DOI skid plate prototype
She's a sh1t breaker
|
06-14-2006, 04:59 AM
|
|
Hummer Guru
|
|
Join Date: Nov 2005
Location: rollin with Beebs & F5
Posts: 5,546
|
|
Re: Just finished DOI skid plate prototype
hell you two chicks are our test drivers i dont do anything till Bebe goes first
__________________
GREEN no BLING , LINE-X & 35's , Adv. , monsoon & some other crap too
Hangin with my HOABies , Bling is cool but HOABies RULE!!!!
Black Sheep Hummer Squadron / camp no due's & no dont's
* Rollin with the Banned and the Damned *
"Fred Thompson for President "
|
06-14-2006, 04:59 AM
|
|
Hummer Guru
|
|
Join Date: Nov 2005
Location: rollin with Beebs & F5
Posts: 5,546
|
|
Re: Just finished DOI skid plate prototype
Quote:
Originally Posted by HummBebe
She's a sh1t breaker
|
Look whos talkin
__________________
GREEN no BLING , LINE-X & 35's , Adv. , monsoon & some other crap too
Hangin with my HOABies , Bling is cool but HOABies RULE!!!!
Black Sheep Hummer Squadron / camp no due's & no dont's
* Rollin with the Banned and the Damned *
"Fred Thompson for President "
|
06-14-2006, 05:22 AM
|
|
Banned
|
|
Join Date: Aug 2005
Location: Chapin, South Carolina
Posts: 1,943
|
|
Re: Just finished DOI skid plate prototype
Quote:
Originally Posted by NEOCON1
i dont do anything till Bebe goes first
|
coughpussycough
|
06-14-2006, 05:26 AM
|
|
Hummer Guru
|
|
Join Date: Nov 2005
Location: rollin with Beebs & F5
Posts: 5,546
|
|
Re: Just finished DOI skid plate prototype
__________________
GREEN no BLING , LINE-X & 35's , Adv. , monsoon & some other crap too
Hangin with my HOABies , Bling is cool but HOABies RULE!!!!
Black Sheep Hummer Squadron / camp no due's & no dont's
* Rollin with the Banned and the Damned *
"Fred Thompson for President "
|
06-14-2006, 05:32 AM
|
Hummer Guru
|
|
Join Date: Jul 2005
Location: nonpiker
Posts: 5,900
|
|
Re: Just finished DOI skid plate prototype
Nope
|
06-14-2006, 05:39 AM
|
|
Hummer Guru
|
|
Join Date: Nov 2005
Location: rollin with Beebs & F5
Posts: 5,546
|
|
Re: Just finished DOI skid plate prototype
i still luv you
__________________
GREEN no BLING , LINE-X & 35's , Adv. , monsoon & some other crap too
Hangin with my HOABies , Bling is cool but HOABies RULE!!!!
Black Sheep Hummer Squadron / camp no due's & no dont's
* Rollin with the Banned and the Damned *
"Fred Thompson for President "
|
06-14-2006, 05:40 AM
|
Hummer Guru
|
|
Join Date: Jul 2005
Location: nonpiker
Posts: 5,900
|
|
Re: Just finished DOI skid plate prototype
Yeah, mee too
|
06-14-2006, 06:38 AM
|
Hummer Guru
|
|
Join Date: Jul 2005
Posts: 4,123
|
|
Re: Just finished DOI skid plate prototype
Holy Jeebus, Pismo is gonna be a lovefest with you two there.
__________________
|
06-14-2006, 01:56 PM
|
|
Hummer Guru
|
|
Join Date: Nov 2005
Location: rollin with Beebs & F5
Posts: 5,546
|
|
Re: Just finished DOI skid plate prototype
LMAO sewie nice sunset pic you got there
__________________
GREEN no BLING , LINE-X & 35's , Adv. , monsoon & some other crap too
Hangin with my HOABies , Bling is cool but HOABies RULE!!!!
Black Sheep Hummer Squadron / camp no due's & no dont's
* Rollin with the Banned and the Damned *
"Fred Thompson for President "
|
06-14-2006, 02:04 PM
|
|
Hummer Guru
|
|
Join Date: Aug 2005
Location: Frequently somewhere else...
Posts: 2,092
|
|
Re: Just finished DOI skid plate prototype
__________________
Rob (Ipedog - Say "Ip-E-Dog")
Black Sheep HUMMER Squadron
|
06-14-2006, 03:05 PM
|
Hummer Guru
|
|
Join Date: Jul 2005
Location: nonpiker
Posts: 5,900
|
|
Re: Just finished DOI skid plate prototype
Quote:
Originally Posted by Sewie
Holy Jeebus, Pismo is gonna be a lovefest with you two there.
|
**whisper**
he's a little jealous
he's berry sensitive
I wuv you too Sewie Sometimes.
Last edited by HummBebe : 06-14-2006 at 03:19 PM.
|
06-14-2006, 03:12 PM
|
|
Hummer Guru
|
|
Join Date: Aug 2005
Location: Frequently somewhere else...
Posts: 2,092
|
|
Re: Just finished DOI skid plate prototype
Quote:
Quote:
Originally Posted by Sewie
Holy Jeebus, Pismo is gonna be a lovefest with you two there.
**whisper**
he's a little jealous
he's berry sensitive
I wuv you too Sewie
|
You guys need to get a room!
Okay... Enough of the luvy-duvy stuff....
Matt DOI -
For a prototype this looks really good. As for ghetto engineering... I don't think so. I don't know what crush-nut zerts are, but the only thing I saw that really worried me was the exposed, unprotected bolt heads. Perhaps crush-nut zerts take care of that...
From what I've seen here, yeah, I could be really interested in this. Please keep us informed.
__________________
Rob (Ipedog - Say "Ip-E-Dog")
Black Sheep HUMMER Squadron
|
06-14-2006, 03:49 PM
|
|
Hummer Messiah
|
|
Join Date: Feb 2003
Location: Federal penitentiary
Posts: 21,046
|
|
Re: Just finished DOI skid plate prototype
I saw this skid plate on a picture at my Hummer dealership. Talk about a sweek underbody setup.
|
06-14-2006, 04:23 PM
|
Hummer Guru
|
|
Join Date: Jul 2005
Location: nonpiker
Posts: 5,900
|
|
Re: Just finished DOI skid plate prototype
"sweek"
Is that a combination of sweet/trick???
|
06-14-2006, 04:52 PM
|
|
Hummer Expert
|
|
Join Date: May 2006
Location: I have feelers everywhere
Posts: 550
|
|
Re: Just finished DOI skid plate prototype
Quote:
Originally Posted by HummBebe
"sweek"
Is that a combination of sweet/trick???
|
.
__________________
T&A Founding member
T&A Goddess
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 08:22 PM.
|