|
#1
12-22-2002, 03:46 AM
Join Date: Dec 2002
Posts: 33
I removed the spare tire from the rear and the small bolt that held down the tool kit is sticking out. I removed the top part of it with a pipe wrench but the threaded part below is being stubborn. Does this bolt twist off or does it need to be cut off?
#2
12-22-2002, 03:46 AM
Join Date: Dec 2002
Posts: 33
I removed the spare tire from the rear and the small bolt that held down the tool kit is sticking out. I removed the top part of it with a pipe wrench but the threaded part below is being stubborn. Does this bolt twist off or does it need to be cut off?
#3
12-22-2002, 11:47 PM
Join Date: Nov 2002
Location: Fort Worth, TX USA
Posts: 41
I cut mine off.
Mango
__________________
Mango -- Saltwater Flyfisherman, Photographer, Varmint Hunter -- Fort Worth, Tx
\"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.\"
#4
12-23-2002, 10:56 AM
Join Date: Nov 2002
Location: Aruba
Posts: 349
I used the thin metal plate, large bolt and thread (sticking out) to hold toolkit in place, just where the spare tire used to be.
Also had someone fabricate a bracket to hold the jack in (original) place ($ 10).
Don't have any storage room left under 2nd row seats.
#5
01-03-2003, 08:05 PM
Join Date: Jan 2003
Location: Orchard Lake, MI
Posts: 29
It is a weld stud and therefore welded to the floor. Cutting is the only way to rid yourself of it
.
***BLANK*** at this time
__________________
Founding member of the \"No Hummer Krew\"
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 01:46 AM.
Linear Mode
