Console disassembly instructions

[BLOWNZO6]

I need to get at the back of my radio.. any instructions on console disassembly online?

I am sure I can just start pulling stuff apart.. there always seems to be that ONE clip you did not see or cannot get off.. just looking to save myself some headache.

TIA

[BLOWNZO6]

I need to get at the back of my radio.. any instructions on console disassembly online?

I am sure I can just start pulling stuff apart.. there always seems to be that ONE clip you did not see or cannot get off.. just looking to save myself some headache.

TIA

[Battlebugs]

Find "Center Console"

[Hummertech]

Here we go.
Take off shifter handle
pop up shifter plate, held on by 3 retainers that will most likely fall down by the bottom
of shifter. Use a flat blade screwdriver and be gentle.
then take out your compartment in console (underneath console lid).
Now you will see 4 10mm head bolts beneath your
console compartment, and one 10mm head bolt to the right hand side of shifter. Take those out.
Now here are your hidden bolts,
2 7mm head bolts that attach the console to the radio. they go toward the front of truck. you can feel them with your fingers. In the center, and a little right of center. Then, slide your console back.
Now take out your 2 hex head bolts on your radio trim plate, the rest of that tri m plate is
held on by retainers. just pull back after the bolts are out. Then disconnect y our lighter and aux. power connectors.
You're there.