|
|
01-15-2008, 08:54 PM
|
Hummer Veteran
|
|
Join Date: Jan 2008
Location: Hot Springs, Arkansas
Posts: 151
|
|
STEERING SLOP???
Everyone,
Just bought a used H2....LOVE IT!.....and it's got a ton of "steering slop", especially at highway speeds. I've owned a lot of GM vehicles previously, and am slightly used to play in the steering, but NOTHING like this?
Anyone experience this same problem, know what causes it, or have a fix?
Thanks in advance,
DUCK
|
01-15-2008, 11:10 PM
|
Hummer Veteran
|
|
Join Date: Nov 2006
Posts: 172
|
|
Re: STEERING SLOP???
Check your hub bearings and inner tie rods. If it has aftermarket wheels, the hub bearings tend to go out the window.
|
01-18-2008, 02:40 AM
|
Hummer Guru
|
|
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 2,767
|
|
Re: STEERING SLOP???
I agree that the bearings go bad rather frequently but unless they're obnoxious, I'd vote for a idler arm. I just replaced mine last week. It really tightened up the steering.
Put the truck up on the lift and see if the tires move back and forth. You should be able to see what is (or isn't) moving along with the tires.
I've seen quite a few bearings go bad on these trucks but never bad enough to have obnoxious amounts of "play" in the steering wheel. It was more like something was loose.
Mark
|
01-18-2008, 04:33 PM
|
|
Hummer Professional
|
|
Join Date: Jul 2005
Location: New Jersey
Posts: 255
|
|
Re: STEERING SLOP???
I did my idler and pitman and also put in a cognito kit with it. did that at 42,000 miles.....I now have 96,000 - idler and pitman are great....just change all tierod ends and wheel bearings. Drives like new again
I run 20"s with 37's -
|
01-22-2008, 05:52 PM
|
Hummer Veteran
|
|
Join Date: Jan 2008
Location: Hot Springs, Arkansas
Posts: 151
|
|
Re: STEERING SLOP???
Thanks fellas.
JDJ
|
01-24-2008, 12:54 PM
|
Hummer Guru
|
|
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 2,767
|
|
Re: STEERING SLOP???
Quote:
Originally Posted by HUM GOOD
I did my idler and pitman and also put in a cognito kit with it. did that at 42,000 miles.....I now have 96,000 - idler and pitman are great....just change all tierod ends and wheel bearings. Drives like new again
I run 20"s with 37's -
|
What's a cognito kit? I'm going to go through my entire front end and want to replace anything I can with an upgrade.
Thanks,
Mark
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 02:48 AM.
|