Re: Is your stock exhaust flat on the bottom?
Quote:
Originally Posted by PhilD
If you mean whewr it goes under the tranny pan, then that is normal. I'm guessing it was done for clearance. My stock UCP used to bend up and vibrate against it all the time, so a full round pipe would either be too close to the tranny pan, or require losing some much needed ground clearance.
|
Same thing happened to me twice. That stock UCP is a pain in the ass to bend back! I had to remove it both times. Now my exhaust is flat w/a kink in it.
__________________
00 H1 opentop (HMCO) Red/Tan, 6.5 Turbo Diesel, CTIS, 37x12.50 Cooper STT's
|