I always turn the NAV unit off before I shut down so tha it comes right up with NAV & XM. Otherwise for some reason it does the reboot the NAV CD and Download XM thing if left on when you first start the rig.
I fired the rig up and then about 10 seconds later hit the power on the NAV Radio. That's when the screen went all garbled and glitched with funny looking gack.
It was dark and I couldn't make out Crap. I shut off the nav power and turned it back on but the same thing happened. Next step...I shut the rig off. Then restarted it and then powered the NAV up again.
At that point...the Nav came back on...with the XM. WTF.???
Anyone else have any cold weather problems with the NAV.??
I think these units don't dig the cold at all. I know CD drive mecks don't do well in cold weather.
What's your experience with this topic.??
RYD
OK..let me correct my self.....Your correct..I forgot ..the H3 Logo comes up first. And the Checking Disc comes up if you leave the radio on when your shut your rig off and resrat.
Try turning your NAV Radio off before you shut down. Then after you start up turn your NAV on....it should go directly to NAV and or XM with out the checking disc crap.
Maybe there is a difference since mine was a dealer XM install with the GM after market kit. But if I don't shut down the NAV before I turn off ..the XM will say " Downloading" ..this takes about 30 seconds to reload.
Is yours a factory XM Install..??
So if yours keeps acting up you can buy mine, I am taking it out Monday and puting back my old setup.
Theres a hole in my head, where the rain comes in
I think these units don't dig the cold at all. I know CD drive mecks don't do well in cold weather.
What's your experience with this topic.??
This only happend once as of the post date when it was about 10-15*F outside. It hasn't happened again since. So who knows..maybe just a boot up thing do to the cold weather.
Thread Tools
Search this Thread
Display Modes
Posting Rules