|
#2
09-03-2007, 03:06 AM
Banned
Join Date: Feb 2005
Location: Westwwod, CA.
Posts: 2,501
Re: Help
Buy yourself a VOA meter. Learn to check continuity (Ohms).
Use the meter to figure out which two contacts have zero resistance (ohms) between them when switched on. Those are for the positive lead and the load (lights). To figure out which is which, connect the third lead to a ground source (e.g. bare metal car body) and see which of the first two contacts lights up the switch in the ON psition only. That one gets the positive, the other gets the load.
Post photos when complete.
Last edited by tower : 09-03-2007 at 03:14 AM.
#3
09-03-2007, 04:05 AM
Hummer Guru
Join Date: Dec 2006
Posts: 2,195
Re: Help
or just have the dealer put it in
__________________
2003 H1 HMCS: Ocean Blue Metallic, Grey Leather Interior
2010 H3 Alpha: Canyon Metallic, Cashmere Interior
2017 VW Jetta S
2012 Cessna 182T Skylane
used to have: 2007 base H3 Slate Blue
/''T''|[___|___]
[---T--L -OlllllllO-]
()_)"""()_)/"**"\)_)
#4
09-03-2007, 05:03 AM
Hummer Veteran
Join Date: Apr 2007
Posts: 221
Re: Help
Pin A - Power input from relay or lamps that powers the internal LED. (Inside the switch, this circuit goes directly to LED and then directly to the ground circuit inside the switch.
Pin B - Ground
Pin C - Used by relay for ground. This is the circuit that goes into the switch and connects to ground when the switch is pressed.
Courtesy of f5.
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 03:44 AM.
Linear Mode
