ATTN: Bling queen H2Rocks

[ssgharkness020147]

Do you have upgraded skid guards yet? If not there is a set that you might like, made and tested by the physco squad. I'd actually like to get a set of these down the road they are made fully from steel. And for you Rocks, they are available in STAINLESS!

[timgco]

She can;t here you. She's too busy using her new ones in Moab,

[ROX]

thanks! There is a pic of my new rails on the Moab thread in the h2 pic section. Unfortunately they are black :sad: they are like those ones too. 1/4 in. Steel. Added the rubberduck ucp, frame rails & wheel covers.

I thought about adding the 3 in. Suspension lift and 40" tires next.
How wide a tire would be too wide? I've noticed there are only a few manufacturers to choose from

[RuggedH2]

Here they are....going on in the Gonzo parking lot. Rox was under there wrenching.

Hope I didn't steal your thunder Rox.

[ROX]

Thanks. That shows a good pic of the frame rail protectors we put on.
Unfortunately those weren't stainless either.

BTW, who you calling H2 Rocks?

[pdxhummerguy]

Hey rox, are those vent shades you have on the front windows? The rig is looking good. i still vote for a big 9 foot basket like mine has.

[dochummer]

Hey Rox! How's traveling with the youngsters in that beast? I was looking at a used one locally here, and it didn't seem like the back had as much room as the H2... What's your impression so far?

[ssgharkness020147]

Originally Posted by ROX

thanks! There is a pic of my new rails on the Moab thread in the h2 pic section. Unfortunately they are black :sad: they are like those ones too. 1/4 in. Steel. Added the rubberduck ucp, frame rails & wheel covers.

I thought about adding the 3 in. Suspension lift and 40" tires next.
How wide a tire would be too wide? I've noticed there are only a few manufacturers to choose from

You would not need a suspension lift for the 40's, the Alpha's can fit them stock. Or are you just trying to make your truck taller than mine?

I've the the IROKS in 13.5 wide. They fit nicely, the steering stops will have to be adjusted a bit. Personally, I'd hold on suspension mods until the warranty is up. HUMMER will probably try and void any steering suspension problems you may have due to your lift. BTW, the rock rails look great. I love the wheel covers, I've got the same ones.

[Sewie]

Originally Posted by RuggedH2

Here they are....going on in the Gonzo parking lot. Rox was under there wrenching.

It was cozy under there.


Nice name change Rox.

[ROX]

Originally Posted by ssgharkness020147

You would not need a suspension lift for the 40's, the Alpha's can fit them stock. Or are you just trying to make your truck taller than mine? MAYBE

I've the the IROKS in 13.5 wide. They fit nicely, the steering stops will have to be adjusted a bit. Personally, I'd hold on suspension mods until the warranty is up. HUMMER will probably try and void any steering suspension problems you may have due to your lift. OK BTW, the rock rails look great. I love the wheel covers, I've got the same ones.

Thanks. I had a local shop make the rails. I needed them a little quicker than I could have ordered them. Do you have the IROK radials? or bias ply?

[ROX]

Originally Posted by pdxhummerguy

Hey rox, are those vent shades you have on the front windows? The rig is looking good. i still vote for a big 9 foot basket like mine has.

No vent shades, but I do have a gobi rack ordered.

[pdxhummerguy]

Its already looking great but that is going to be so nice. did you get the one that convers the whole entire top? We need to go wheel. I called you the other day but you must have been out of town. Let's put something together. I am ready whenever.

[ROX]

Originally Posted by dochummer

Hey Rox! How's traveling with the youngsters in that beast? I was looking at a used one locally here, and it didn't seem like the back had as much room as the H2... What's your impression so far?

Well, there are exactly 4 chairs. Horrible hyway noise and rides more like a dump truck than a dump truck. With all your little ones, I'd keep the 2. Seriously. Your wife will thank me.

Besides the kids say I bought it so they couldn't touch each other. Now they just thow stuff across.

[ROX]

Originally Posted by pdxhummerguy

Its already looking great but that is going to be so nice. did you get the one that convers the whole entire top? We need to go wheel. I called you the other day but you must have been out of town. Let's put something together. I am ready whenever.

yes, I got your message but couldn't reply from Hells Revenge! I know a couple of good deep holes to go play in. You must have got yours back.

[ROX]

Originally Posted by Sewie

Nice name change Rox.

magic, I discovered it this morning when I tried to log on.

[ssgharkness020147]

Originally Posted by ROX

Thanks. I had a local shop make the rails. I needed them a little quicker than I could have ordered them. Do you have the IROK radials? or bias ply?

Radials. Bias ply's are no good for road use, flat spots in the morning and the risk of blowouts on the highway.

[DRTYFN]

Originally Posted by pdxhummerguy

Its already looking great but that is going to be so nice. did you get the one that convers the whole entire top? We need to go wheel. I called you the other day but you must have been out of town. Let's put something together. I am ready whenever.

[pdxhummerguy]

Originally Posted by ROX

yes, I got your message but couldn't reply from Hells Revenge! I know a couple of good deep holes to go play in. You must have got yours back.

I do have mine back and am ready to play. I have a cocky friend with a toyota that is all souped up that is cocky and has clamied he can go anywhere we can go. I suppose we should put that statement to the test.

[pdxhummerguy]

Originally Posted by DRTYFN

What are you laughing at?

[DRTYFN]

Originally Posted by pdxhummerguy

What are you laughing at?

You wheeling.