If so, will they rub?
Thanks
360 degrees / 8 lugs = 45 degrees between lugs.
360 degrees / 6 lugs = 60 degrees between lugs
Least common multiple of 45 and 60 = 180 degrees
i.e. If the radius from the center of the wheel to the lugs is identical, only 2 of those lugs are going to line up at 0 and 180 degrees.
Unless someone makes wheels without lugs spaced evenly, you're going to need a lot of superglue
'03 pewter base H2
Originally posted by Chinkierol30:
I noticed that but was hoping maybe 6 of the holes on the H2 wheel might line up and I could super glue the other two nuts on or something.
Hey man just get you a grindin wheel and slot them holes out!!!!
JUST KIDDNG! No way they will fit.
00 H1 opentop (HMCO) Red/Tan, 6.5 Turbo Diesel, CTIS, 37x12.50 Cooper STT's
"energy drinks that contain "taurine" make you SH.IT like a bitch"
lol
that is all...
Originally posted by Chinkierol30:
I noticed that but was hoping maybe 6 of the holes on the H2 wheel might line up and I could super glue the other two nuts on or something.
Originally posted by KenP:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Chinkierol30:
I noticed that but was hoping maybe 6 of the holes on the H2 wheel might line up and I could super glue the other two nuts on or something.
\'03 Lux "white" w/air suspension and kick ass tires (raised letters out) and a '07 jeep Wrangler 4dr Rubi that's just as cool!
Thread Tools
Search this Thread
Display Modes
Posting Rules