 |
|
10-09-2008, 06:43 AM
|
 |
Hummer Professional
|
|
Join Date: Feb 2006
Posts: 368
|
|
Clunk on Aceleration from a stop
Im hearing a clunk (non-driveline) in the front end when i accelerate just off a stop....
Brought it to hummer, they replaced a bad idler arm (Showed me on the lift....it was definatly bad) and a bad wheel bearing (Once again, showed me on the lift and it was wasted). So they did good replacing 2 parts, and the wheel bearing was REALLY bad....but still i have the clunk.
Anyone got this same clunk sound? Sounds like a stiff bushing sound or somthing to that effect.
--John
__________________
2006 Hummer H2 Lux Series
www.JohnHasMoreFun.com
1/4 Mile 15.29@91.34mph
Mods:
Magnusun Radix Supercharger!!!
Switch to allow full Nav Controls while moving
Warn 9.5 Winch
|
10-09-2008, 11:49 AM
|
 |
Hummer Authority
|
|
Join Date: May 2006
Location: Texas
Posts: 1,132
|
|
Re: Clunk on Aceleration from a stop
Yuppers. I get that sound also. New Idler and Pitman...and Cognito support. Had everything checked and aligned and all looks good. I'm wondering if it might be a noise from the brakes??? Don't know.
|
10-09-2008, 07:46 PM
|
 |
Hummer Veteran
|
|
Join Date: Mar 2008
Posts: 205
|
|
Re: Clunk on Aceleration from a stop
If the clunk is on acceleration and braking then it sounds like hubs might be bad or as you have already fixed bearings. If the clunk is is when turing the wheels left or right and so forth then I would look into the steering components more. I have had both of these problems and I am curently in the process of re-doing the entire steering system. This including new pitman arm, new Idler arm idler support, pitman support and idler block, with new tierods to finish it off.The clunk sound on acceleration was fixed for me when I replaced the HUB.
thanks
B
|
10-10-2008, 04:06 AM
|
 |
Hummer Authority
|
|
Join Date: Sep 2005
Location: Texas
Posts: 1,795
|
|
Re: Clunk on Aceleration from a stop
Remove skidplate to see if that's causing it
Also, check bolts on rear lower control arms.
__________________
H2 SUT 4.56 Gears, Front Locker, Cognito Pitman/Idler kit & Idler Pivot Kit, Fab Tech Tie Rods, True Tech Trailing Arms, Edelbrock Panhard Rod, PML rear Diff & Tranny Pans, Corsa Exhaust, Dynatech LT Headers, Diablo Predator Programmer, Volant CAI, Warn 9500 Winch, Escort 8500x50 & ZR3 Laser Shifter, Delta Light Bar, Rancho Steering Stabilizer & Bilstein Shocks, Ron Davis Radiator, PowerSlot Rotors, Hawk Brake Pads
|
10-16-2008, 03:28 PM
|
 |
Hummer Guru
|
|
Join Date: Jan 2005
Location: Oregon
Posts: 4,321
|
|
Re: Clunk on Aceleration from a stop
I had a cross membr bushing go bad. If I remember correctly, it was in the front.
__________________
If it has tires or testicles, you're going to have trouble with it
|
10-24-2008, 06:58 PM
|
|
Hummer Professional
|
|
Join Date: Feb 2003
Location: Palm Desert, CA
Posts: 470
|
|
Re: Clunk on Aceleration from a stop
A broken motor mount can cause this sound also....
__________________
2003 H2 Hummer, Yellow,Polished Whipple Supercharged, Dynatech long tube headers, catback,18\" Ambush w/Toyo MT\'s,lots of goodies!
Y2K Corvette Millennium Yellow Convert/Blk/Blk, B&B headers, B&B Tri-Flo\'s, H-Tech MAG,GMS MAF, RM Racing TwinFlow.
1994 Chev Suburban Blown
1970 Trans Am balanced, blueprinted, ceramic headers, etc.
|
12-07-2008, 08:51 AM
|
 |
Hummer Guru
|
|
Join Date: Jun 2006
Location: Out West
Posts: 2,539
|
|
Re: Clunk on Aceleration from a stop
I have a clunk, too, when going from a stop position to accelerate. I was told it's probably just a suspension noise (because of the weight of the H2). Now that I'm reading others have this and it's not the suspension, I'll have to make another trip to the dealer.
__________________
2008 H2 Graystone Metallic
2006 H3 Black (sold)
previously known as Hmmm3
|
12-07-2008, 05:24 PM
|
 |
Hummer Professional
|
|
Join Date: May 2006
Location: las vegas
Posts: 301
|
|
Re: Clunk on Aceleration from a stop
my 08 sut does the same thing...
__________________
scott j.
2008 h2 sut
2008 escalade
1969 charger
|
12-08-2008, 03:15 AM
|
 |
Hummer Authority
|
|
Join Date: Sep 2003
Location: Canada
Posts: 1,251
|
|
Re: Clunk on Aceleration from a stop
Check your front diff mounting bolts. We just had one in where the rear lower bolt fell out, the diff spun up and took out the oil filter, luckily the customer had the presence of mind to shut it down before killing the motor.
|
12-08-2008, 04:42 AM
|
 |
Hummer Authority
|
|
Join Date: Nov 2004
Location: Little Rock, Arkansas
Posts: 1,784
|
|
Re: Clunk on Aceleration from a stop
HUMTECH knows better than me for sure but, just wanted to toss in the age old problem with GM trucks ans suvs. There has always, why is beyond me it cannot be corrected, been the dreaded drive shaft clunk. It is most likely not the problem here but, all should keep this problem in mind for future.
TAZ
__________________
05 H2 SUV cus. paint, Magnuson SC 6/12lb boost, cowl hood scoop, 12" dash touchscreen, GM elec. fans, HPTuners.com tuning soft., Dynatech headers dual catback exhaust Jet Hot chrome front to back Flowmaster Super 40's, Diamo 8 Karat rims & 325X60-20" Toyo, 4 OEM Captain seats Katzkins leather, rear console computer inside running all AV/NAV etc., Infinity component system 3 amps Tsunami Caps, rear flip down 12" monitor, headrest monitors, overhead console boost, fuel pressure, & A/F ratio gauges
|
12-10-2008, 12:12 AM
|
|
Hummer Authority
|
|
Join Date: Sep 2003
Location: Canada
Posts: 1,251
|
|
Re: Clunk on Aceleration from a stop
True, that annoying but subtle clunk from a stop. There was a "fix" for this but it still seemed to come back in some cases. There was an updated slip yoke for the shaft that was nickle plated. Problem was mostly in full size trucks but was also a problem on some early model h-2's. This was a very subtle clunk type noise and was not damaging but more of an annoying problem. All in all worth a look though. Another way to band-aid this problem was to remove the rear shaft and lube the splines of the slip yoke with a gm "special lube" similar to lithium grease but a little thicker.
|
12-11-2008, 09:46 PM
|
|
Hummer Authority
|
|
Join Date: Sep 2005
Location: Texas
Posts: 1,795
|
|
Re: Clunk on Aceleration from a stop
Oh yeah, I forgot about the drive shaft clunk. Mine does it when I come to a slow corner, make the turn and then speed up.
Then there's the front body mounts too
__________________
H2 SUT 4.56 Gears, Front Locker, Cognito Pitman/Idler kit & Idler Pivot Kit, Fab Tech Tie Rods, True Tech Trailing Arms, Edelbrock Panhard Rod, PML rear Diff & Tranny Pans, Corsa Exhaust, Dynatech LT Headers, Diablo Predator Programmer, Volant CAI, Warn 9500 Winch, Escort 8500x50 & ZR3 Laser Shifter, Delta Light Bar, Rancho Steering Stabilizer & Bilstein Shocks, Ron Davis Radiator, PowerSlot Rotors, Hawk Brake Pads
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 11:21 AM.
|
