|
TSB - Adm Msg - H2 Windshield Wiper Pulse Function #HUS20040012 -
Thread Tools
Search this Thread
Display Modes
#1
07-26-2004, 10:33 PM
Hummer Guru
Join Date: Nov 2002
Location: CSA
Posts: 2,511
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD><TITLE>Service Information</TITLE>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="Microsoft FrontPage 5.0" name=GENERATOR></HEAD>
<BODY bgColor=#ffffff>
<FORM name=topNavForm action=/servlets/CellHandler>
<TABLE width="100%" align=center>
<TBODY>
<TR>
<TD width="25%" slign="LEFT"></TD>
<TD align=middle width="50%">Document ID# 1503742
2003 HUMMER
H2 </TD>
<TD align=right width="25%"></TD></TR></TBODY></TABLE>
<HR>
</FORM>
<H1>Adm Msg - H2 Windshield Wiper Pulse Function #HUS20040012 -
(04/27/2004)</H1>Windshield Wiper Pulse Function
2003-2004 HUMMER H2</P>
Should a customer indicate that when switching the windshield wiper speed
from "low" to "intermittent," and the speed remains in "low," check for the
following condition.</P>
If making the switch from "low" to "intermittent" during the first
6minutes after a key cycle, and it functions properly, then making the
switch again during the 7to12minute timeframe after the key
cycle, and it does not function properly, the problem cannot currently be
corrected. </P>
This condition repeats itself every 6minutes due to a coding error in
the module software. The coding is currently being corrected and you will be
notified of the new part number when the parts are available.</P>
</P>
<TABLE width="100%">
<TBODY>
<TR>
<TD align=left width=778><FONT size=1>GM bulletins are intended for use by
professional technicians, NOT a "do-it-yourselfer". They are written
to inform these technicians of conditions that may occur on some vehicles,
or to provide information that could assist in the proper service of a
vehicle. Properly trained technicians have the equipment, tools,
safety instructions, and know-how to do a job properly and safely.
If a condition is described, DO NOT assume that the bulletin applies to
your vehicle, or that your vehicle will have that condition. See
your GM dealer for information on whether your vehicle may benefit from
the information.
</FONT></TD>
<TD align=middle width=42></TD>
<TD align=middle width=167><FONT size=2>WE SUPPORT VOLUNTARY TECHNICIAN
CERTIFICATION
</FONT></TD></TR></TBODY></TABLE>
<P align=center>© Copyright General Motors Corporation. All Rights
Reserved. </P>
<FORM name=bottomNavForm>
<HR>
<TABLE width="100%" align=center>
<TBODY>
<TR>
<TD width="25%" slign="LEFT"></TD>
<TD align=middle width="50%">Document ID# 1503742
2003 HUMMER
H2</TD>
<TD align=right width="25%"></TD></TR></TBODY></TABLE></FORM></BODY></HTML>
#2
07-26-2004, 10:33 PM
Hummer Guru
Join Date: Nov 2002
Location: CSA
Posts: 2,511
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD><TITLE>Service Information</TITLE>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="Microsoft FrontPage 5.0" name=GENERATOR></HEAD>
<BODY bgColor=#ffffff>
<FORM name=topNavForm action=/servlets/CellHandler>
<TABLE width="100%" align=center>
<TBODY>
<TR>
<TD width="25%" slign="LEFT"></TD>
<TD align=middle width="50%">Document ID# 1503742
2003 HUMMER
H2 </TD>
<TD align=right width="25%"></TD></TR></TBODY></TABLE>
<HR>
</FORM>
<H1>Adm Msg - H2 Windshield Wiper Pulse Function #HUS20040012 -
(04/27/2004)</H1>Windshield Wiper Pulse Function
2003-2004 HUMMER H2</P>
Should a customer indicate that when switching the windshield wiper speed
from "low" to "intermittent," and the speed remains in "low," check for the
following condition.</P>
If making the switch from "low" to "intermittent" during the first
6minutes after a key cycle, and it functions properly, then making the
switch again during the 7to12minute timeframe after the key
cycle, and it does not function properly, the problem cannot currently be
corrected. </P>
This condition repeats itself every 6minutes due to a coding error in
the module software. The coding is currently being corrected and you will be
notified of the new part number when the parts are available.</P>
</P>
<TABLE width="100%">
<TBODY>
<TR>
<TD align=left width=778><FONT size=1>GM bulletins are intended for use by
professional technicians, NOT a "do-it-yourselfer". They are written
to inform these technicians of conditions that may occur on some vehicles,
or to provide information that could assist in the proper service of a
vehicle. Properly trained technicians have the equipment, tools,
safety instructions, and know-how to do a job properly and safely.
If a condition is described, DO NOT assume that the bulletin applies to
your vehicle, or that your vehicle will have that condition. See
your GM dealer for information on whether your vehicle may benefit from
the information.
</FONT></TD>
<TD align=middle width=42></TD>
<TD align=middle width=167><FONT size=2>WE SUPPORT VOLUNTARY TECHNICIAN
CERTIFICATION
</FONT></TD></TR></TBODY></TABLE>
<P align=center>© Copyright General Motors Corporation. All Rights
Reserved. </P>
<FORM name=bottomNavForm>
<HR>
<TABLE width="100%" align=center>
<TBODY>
<TR>
<TD width="25%" slign="LEFT"></TD>
<TD align=middle width="50%">Document ID# 1503742
2003 HUMMER
H2</TD>
<TD align=right width="25%"></TD></TR></TBODY></TABLE></FORM></BODY></HTML>
#3
07-26-2004, 10:33 PM
Hummer Guru
Join Date: Nov 2002
Location: CSA
Posts: 2,511
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD><TITLE>Service Information</TITLE>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="Microsoft FrontPage 5.0" name=GENERATOR></HEAD>
<BODY bgColor=#ffffff>
<FORM name=topNavForm action=/servlets/CellHandler>
<TABLE width="100%" align=center>
<TBODY>
<TR>
<TD width="25%" slign="LEFT"></TD>
<TD align=middle width="50%">Document ID# 1503742
2003 HUMMER
H2 </TD>
<TD align=right width="25%"></TD></TR></TBODY></TABLE>
<HR>
</FORM>
<H1>Adm Msg - H2 Windshield Wiper Pulse Function #HUS20040012 -
(04/27/2004)</H1>Windshield Wiper Pulse Function
2003-2004 HUMMER H2</P>
Should a customer indicate that when switching the windshield wiper speed
from "low" to "intermittent," and the speed remains in "low," check for the
following condition.</P>
If making the switch from "low" to "intermittent" during the first
6minutes after a key cycle, and it functions properly, then making the
switch again during the 7to12minute timeframe after the key
cycle, and it does not function properly, the problem cannot currently be
corrected. </P>
This condition repeats itself every 6minutes due to a coding error in
the module software. The coding is currently being corrected and you will be
notified of the new part number when the parts are available.</P>
</P>
<TABLE width="100%">
<TBODY>
<TR>
<TD align=left width=778><FONT size=1>GM bulletins are intended for use by
professional technicians, NOT a "do-it-yourselfer". They are written
to inform these technicians of conditions that may occur on some vehicles,
or to provide information that could assist in the proper service of a
vehicle. Properly trained technicians have the equipment, tools,
safety instructions, and know-how to do a job properly and safely.
If a condition is described, DO NOT assume that the bulletin applies to
your vehicle, or that your vehicle will have that condition. See
your GM dealer for information on whether your vehicle may benefit from
the information.
</FONT></TD>
<TD align=middle width=42></TD>
<TD align=middle width=167><FONT size=2>WE SUPPORT VOLUNTARY TECHNICIAN
CERTIFICATION
</FONT></TD></TR></TBODY></TABLE>
<P align=center>© Copyright General Motors Corporation. All Rights
Reserved. </P>
<FORM name=bottomNavForm>
<HR>
<TABLE width="100%" align=center>
<TBODY>
<TR>
<TD width="25%" slign="LEFT"></TD>
<TD align=middle width="50%">Document ID# 1503742
2003 HUMMER
H2</TD>
<TD align=right width="25%"></TD></TR></TBODY></TABLE></FORM></BODY></HTML>
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 05:26 PM.
Linear Mode
