|
|
06-01-2006, 12:49 AM
|
|
Hummer Expert
|
|
Join Date: Apr 2006
Location: cary nc
Posts: 765
|
|
Did the torsion today
I cranked the torsion bars 3 turns today. Soooooo easy and a $6 socket is all you need. The height from ground to bottom of fender went from 37.75 to 38.5. My ground clearance (ground to bottom of oil pan shield)went from 9.8 to 11 even. I've driven it alittle bit with no difference in the handling yet.
If anyone is trying to do it, use a 1 1/16 socket. Turn them clockwise, and don't forget to mark the bolt and base for reference.
|
06-01-2006, 07:39 AM
|
|
Hummer Expert
|
|
Join Date: Apr 2006
Location: cary nc
Posts: 765
|
|
Re: Did the torsion today
ok I took it on a 60 mile trip and I can feel a few more bumps, but not that huge a difference. For the extra 1.2, I'm happy.
|
06-01-2006, 04:24 PM
|
|
Hummer Expert
|
|
Join Date: May 2005
Location: Southern California
Posts: 829
|
|
Re: Did the torsion today
I cranked mine up 2 turns. I gained almost an inch on the oil pan skid plate
I may go for 3 turns.
I marked the bolt with a dot from a center punch and the frame with a cold chisel.
I'll take it in to the dealer and have the alignment checked next week.
__________________
Desert Dan
H3 2006 Adventure/Lux/5-speed/sunroof/rock rails/underbody skids/block heater/Boulder Grey/ Defender Roof Rack
Jeep TJ Rubicon 2003
1988 Jeep Cherokee
Gone - But- Not Forgotten 4x4's
1994 Jeep YJ
Toyota 4x4 Truck(s)
1970 Jeep CJ-5
1962 Willys Wagon
|
06-01-2006, 04:28 PM
|
Hummer Guru
|
|
Join Date: Jul 2005
Location: nonpiker
Posts: 5,900
|
|
Re: Did the torsion today
I started out at 2.5 turns. Had the dealer take it up to 3. I'm at 11 inches of GC with the 35's and UCP.
No noticable difference in handling, the ride at higher speeds is a little choppy.
Small sacrifice for GC. Plus it looks much better
|
06-01-2006, 05:55 PM
|
|
Banned
|
|
Join Date: Aug 2005
Location: Chapin, South Carolina
Posts: 1,943
|
|
Re: Did the torsion today
Here is an idea of the difference the torsion bar adjustment can make. Both Mine (the yellow H3) and the other H3 have 33's. I think the dealer did about 3-3.5 rotations on mine.
|
06-02-2006, 02:47 AM
|
|
Hummer Veteran
|
|
Join Date: Feb 2006
Location: SIN CITY
Posts: 114
|
|
Re: Did the torsion today
how much out of alignment is it after that?
do your lower control arms touch the bump stops anymore under normal weight?
looks good
__________________
[O][][][][][][][][O]
|
06-02-2006, 02:55 AM
|
|
Hummer Veteran
|
|
Join Date: May 2006
Posts: 223
|
|
Re: Did the torsion today
I adjusted mine 2.5 turns and have no alignment problems.......
__________________
"because chrome wont getcha home."
|
06-02-2006, 03:03 AM
|
|
Hummer Guru
|
|
Join Date: Nov 2005
Location: rollin with Beebs & F5
Posts: 5,546
|
|
Re: Did the torsion today
i went two turns and my bump stops just kiss on one side and the other is about 1/16 of an inch from touching
__________________
GREEN no BLING , LINE-X & 35's , Adv. , monsoon & some other crap too
Hangin with my HOABies , Bling is cool but HOABies RULE!!!!
Black Sheep Hummer Squadron / camp no due's & no dont's
* Rollin with the Banned and the Damned *
"Fred Thompson for President "
|
06-02-2006, 04:39 AM
|
|
Hummer Guru
|
|
Join Date: Mar 2005
Posts: 3,356
|
|
Re: Did the torsion today
this sounds like something i want to do. so start with 1 or 2 turns. Just have the truck strait or what. i'm a dj not a mechanic.
|
06-02-2006, 04:47 AM
|
|
Hummer Guru
|
|
Join Date: Nov 2005
Location: rollin with Beebs & F5
Posts: 5,546
|
|
Re: Did the torsion today
you need to jack up the front so tires are in the air . the adjustment bolts are under the truck about where the rear seats are . i am very happy with 2 turns , 3 will get you a lil more wind noise . there is a thread with pix someplace .
__________________
GREEN no BLING , LINE-X & 35's , Adv. , monsoon & some other crap too
Hangin with my HOABies , Bling is cool but HOABies RULE!!!!
Black Sheep Hummer Squadron / camp no due's & no dont's
* Rollin with the Banned and the Damned *
"Fred Thompson for President "
|
06-02-2006, 05:01 AM
|
|
Hummer Guru
|
|
Join Date: Mar 2005
Posts: 3,356
|
|
Re: Did the torsion today
so this is just for the rear?
|
06-02-2006, 05:05 AM
|
|
Hummer Guru
|
|
Join Date: Nov 2005
Location: rollin with Beebs & F5
Posts: 5,546
|
|
Re: Did the torsion today
no its the front but the adjustment bolts are way back
__________________
GREEN no BLING , LINE-X & 35's , Adv. , monsoon & some other crap too
Hangin with my HOABies , Bling is cool but HOABies RULE!!!!
Black Sheep Hummer Squadron / camp no due's & no dont's
* Rollin with the Banned and the Damned *
"Fred Thompson for President "
|
06-02-2006, 06:25 AM
|
|
Hummer Authority
|
|
Join Date: Nov 2005
Location: Mississippi
Posts: 1,776
|
|
Re: Did the torsion today
Quote:
Originally Posted by HummBebe
I started out at 2.5 turns. Had the dealer take it up to 3. I'm at 11 inches of GC with the 35's and UCP.
No noticable difference in handling, the ride at higher speeds is a little choppy.
Small sacrifice for GC. Plus it looks much better
|
When we were in Moab and Bebe was coming down Main Street at night, with traffic in the way I thought she was an H2 since she has the marker lights
|
06-02-2006, 06:27 AM
|
|
Hummer Authority
|
|
Join Date: Nov 2005
Location: Mississippi
Posts: 1,776
|
|
Re: Did the torsion today
Quote:
Originally Posted by NEOCON1
you need to jack up the front so tires are in the air . the adjustment bolts are under the truck about where the rear seats are . i am very happy with 2 turns , 3 will get you a lil more wind noise . there is a thread with pix someplace .
|
Glad I had the tire shop raise mine
Two times, like brother Neo
|
06-02-2006, 06:31 AM
|
|
Hummer Guru
|
|
Join Date: Nov 2005
Location: rollin with Beebs & F5
Posts: 5,546
|
|
Re: Did the torsion today
__________________
GREEN no BLING , LINE-X & 35's , Adv. , monsoon & some other crap too
Hangin with my HOABies , Bling is cool but HOABies RULE!!!!
Black Sheep Hummer Squadron / camp no due's & no dont's
* Rollin with the Banned and the Damned *
"Fred Thompson for President "
|
06-02-2006, 07:57 PM
|
|
Hummer Expert
|
|
Join Date: Apr 2006
Location: cary nc
Posts: 765
|
|
Re: Did the torsion today
Anytime you do this, you do want to get the alignment checked. The toe in will be off and cause uoter edge tire wear. Just tell the dealer that it pulls to the left if you have less than 7500 miles on it and it's still free under warranty. As far as wind noise, I haven't noticed any difference, but I do have the halogens up there so there was always a little noise.
|
06-02-2006, 08:07 PM
|
|
Hummer Guru
|
|
Join Date: Mar 2005
Posts: 3,356
|
|
Re: Did the torsion today
ok got it! I have a conection at the dealership so i will fill him in. Duh the the bars are for only the front!
|
06-02-2006, 08:22 PM
|
|
Hummer Guru
|
|
Join Date: Apr 2005
Location: Orlando, FL
Posts: 6,358
|
|
Re: Did the torsion today
Quote:
Originally Posted by blindzebra
...if you have less than 7500 miles on it and it's still free under warranty...
|
Not if you changed out the tires. Found out the hard way
__________________
I don't care about the "Jeep thing" as long as my mail is on time!!!
Slate Blue H3 Adventure w/sunroof, Monsoon/NAV, DVD and marker lights
|
06-03-2006, 05:56 AM
|
|
Hummer Authority
|
|
Join Date: Mar 2006
Location: Sacramento, CA
Posts: 1,075
|
|
Re: Did the torsion today
I'm just gonna say this and I don't care who reads it or whatever the f**k they get out of it.
I'm really glad my wife and I got our Hummers. I don't really care to go down to a shop to have it modified. I think it's more fun to try and do stuff on your own to see what happens.
As for me, I am having a great time and this forum and it's really a lot of fun to be a part of.
So if that makes me stupid - broke - trailer trash - a dyke (lol) - or anything else... so be it.
|
06-03-2006, 06:02 AM
|
|
Hummer Veteran
|
|
Join Date: May 2006
Posts: 223
|
|
Re: Did the torsion today
Agreeeeeeeed, home-made is best. Spray-cans, home depot, and imagination...it works wonders.
__________________
"because chrome wont getcha home."
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 08:49 PM.
|