|
|
02-01-2007, 02:44 PM
|
Hummer Expert
|
|
Join Date: May 2006
Location: Johnstown, PA.
Posts: 553
|
|
Possible 4WD Issue
Morning all,
It is very cold here this morning (around 8 degrees). While coming into work this morning, I noticed I had left my HI 4WD locked from the night before. I was almost at highway speed when I noticed. I backed of on the throttle and hit the button for the normal, full-time 4WD selection. The button flashed for several seconds but it did not disengage. I shifted into neutral and let it slow to around 40 mph and then tried the button again. That time it disengaged.
Was something frozen because of the temperature, was I going too fast for it to disengage properly, or I am starting to experience a noteworthy problem? Has anyone else experienced this?
|
02-01-2007, 03:37 PM
|
|
Hummer Authority
|
|
Join Date: Mar 2006
Location: Chicago, IL
Posts: 1,086
|
|
Re: Possible 4WD Issue
as far as i know you have to be in neutral for the transfer case to do its shifting. I dont know if you have to be under 40 or not, not sure about that part, but 40 seems to be the magic number for alot of things so that might be so. But I think there is nothing wrong with it, nothing frozen, its just that way so that you dont shift the case while it is engaged, i guess that can cause damage.
|
02-01-2007, 04:17 PM
|
|
Hummer Veteran
|
|
Join Date: May 2006
Location: Alabama
Posts: 139
|
|
Re: Possible 4WD Issue
Yep, book says that to shift from 4 Wheel High to 4 Wheel High Lock (and vice versa), you have to be traveling less than 45 mph.
__________________
Interleukin
2006 H3, Boulder Grey, Adventure, 33 in. tires, Auto, Sunroof, Tow, Monsoon
The SAINTS are coming!!!
Geaux LSU!!!
|
02-01-2007, 04:34 PM
|
|
Hummer Expert
|
|
Join Date: Nov 2005
Location: Northwest Indiana
Posts: 622
|
|
Re: Possible 4WD Issue
Yes, you have to be going 45 mph or less in order to shift it in and out of 4hi lock. To go into 4 low lock you have to be stopped and in nuetral.
__________________
____________________________
2008 Hummer H3 Alpha Adventure. Graphite Gray Metallic.
|
02-01-2007, 05:11 PM
|
|
Hummer Guru
|
|
Join Date: Nov 2005
Location: rollin with Beebs & F5
Posts: 5,546
|
|
Re: Possible 4WD Issue
seems it worked perfectly
__________________
GREEN no BLING , LINE-X & 35's , Adv. , monsoon & some other crap too
Hangin with my HOABies , Bling is cool but HOABies RULE!!!!
Black Sheep Hummer Squadron / camp no due's & no dont's
* Rollin with the Banned and the Damned *
"Fred Thompson for President "
|
02-01-2007, 05:29 PM
|
Hummer Expert
|
|
Join Date: May 2006
Location: Johnstown, PA.
Posts: 553
|
|
Re: Possible 4WD Issue
Yep - I remember reading that now and I think it was the speed issue. Thanks for the responses
|
02-01-2007, 09:55 PM
|
|
Hummer Authority
|
|
Join Date: Oct 2005
Location: Atlantic City NJ
Posts: 1,453
|
|
Re: Possible 4WD Issue
Quote:
Originally Posted by NEOCON1
seems it worked perfectly
|
|
02-01-2007, 09:59 PM
|
|
Hummer Authority
|
|
Join Date: Oct 2005
Location: Atlantic City NJ
Posts: 1,453
|
|
Re: Possible 4WD Issue
How Does Bebe's Put it....????
RTFM....
There is alot of good info inside...
|
02-01-2007, 10:02 PM
|
Hummer Expert
|
|
Join Date: May 2006
Location: Johnstown, PA.
Posts: 553
|
|
Re: Possible 4WD Issue
Yeah - I am going to write that on the windshield.
Actually, I did but I forgot what it said about it. I was kind of panicking this morning when I posted the thread.....
|
02-01-2007, 10:03 PM
|
Hummer Guru
|
|
Join Date: Jul 2005
Posts: 4,123
|
|
Re: Possible 4WD Issue
Quote:
Originally Posted by marin8703
as far as i know you have to be in neutral for the transfer case to do its shifting.
|
Only when going between 4HI and 4LO.
Quote:
Originally Posted by Mike E
To go into 4 low lock you have to be stopped and in nuetral.
|
You don't have to be completely stopped but you shouldn't be going more than a few MPH.
__________________
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 02:22 AM.
|