|
#1
02-17-2006, 10:33 PM
Join Date: Jan 2006
Location: NorCal
Posts: 26
trying to get the fan clutch off. what tools do i need to get the clutch and fan off the water pump. is it something i can rent from autozone? also, anyone know the exact size of the nut that holds the fan clutch to the waterpump (its huge!)? thanks guys!
__________________
any help is welcome here...
#2
02-18-2006, 01:10 AM
Hummer Expert
Join Date: Mar 2005
Location: Colorado
Posts: 757
You can buy the special tool at Napa for about 40 bucks. It comes with the pulley holder and wrench, just ask for the GM size, not the Ford. I believe the size is 34mm. The pulley holder can be fragile if you don't get a good one, the pins on the Kent-Moore version ALWAYS shear off, the Napa one requires you to use a couple bolts, #10-32 I believe, into the holes as anchors.
__________________
1999 AMGeneral H1 6.5TD BLACK Wagon e-Lockers Front and Back, Rubberduck4x4 RockTubes, Extended Undercarriage Protection,"Big Duck" 2" body lift/2 1/2" suspension lift, 41" IROK Radials on 17" Cepeks w/Rock Rims, (in process)Centered front diff, 3.08 gears, 12k Brakes and 12k halfshafts
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 08:30 AM.
Linear Mode
