My torsion bars are already cranked up so truck is fairly level. (not lifted)
I've looked through all the threads and can't get a firm handle on whether these would rub or not.....(I'm not using it off-road.) Opinions seem to differ.
Can anyone give me an opinion on this specific tire size?.....seems like lots of the members have the Nittos...
Tires will dig into the cab side of the front fenders when you turn. You could cut out the fender liner and beat down the pinchweld behind it for more clearance.
Pavement only, It was still way to tight for me, if you were to slam on the brakes that front end will drop a couple more inches. I ended up going w/ 6" fabtech.
Your next problem- trucks going to be completely gutless. Wont hold overdrive on the highway. plan on another $1000 to drop a few grears.
My personal recomendation would be find 35" tire. No clearance issues, lift, or gears needed.
You might want to look into other tires especially if you want to have that nasty aggressive offroad look but want good street manners as well.
Thread Tools
Search this Thread
Display Modes
Posting Rules