Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   Technical Discussion and Customizing your H2 (http://www.elcovaforums.com/forums/forumdisplay.php?f=5)
-   -   Oil pressure and voltage meter readings.... (http://www.elcovaforums.com/forums/showthread.php?t=37290)

kchummer 04-15-2009 04:32 PM

Oil pressure and voltage meter readings....
 
after getting the H2 warmed up and at a standstill what's everyone's oil pressure reading as well as voltage meter status....When I start mine cold the oil pressure is just above half way (40)....after driving and warming up then coming to a dead stop at idle it reads at about 30 (just under half) and the voltage meter reads just under half way also.....is this normal for the 6.0 motors??? my other pickup which has the 5.3 in it always reads at half or over half on both meters....just checking w/ everyone else....

kchummer 04-15-2009 08:25 PM

Re: Oil pressure and voltage meter readings....
 
guess nobody pays attention to their guages.....:crying:

IRA51 04-15-2009 10:44 PM

Re: Oil pressure and voltage meter readings....
 
the gauges in these trucks (when they are working) are not very accurate ,so I wouldn't worry about it . the 6.0 is a great engine and will with propper mantinance go over 200 k .

Guinnessboy 04-16-2009 12:28 AM

Re: Oil pressure and voltage meter readings....
 
mine is exactly the same which is the way its suppose to be


All times are GMT +1. The time now is 11:34 PM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.