yes the door switches do have to come out, use a small flat head to pry up on the switches, just be very careful. also you need to take the bucket off inside door that helps hold the door panel on, once you do that place a large flathead screwdriver under the bottom corner of any door panel and pry gently, you will here a noise as if it is breaking but its not there are plastic door fasteners that you'll hear. after you get an opening large enough to fit your hands in as you pull the panel out work your awy around the whole paneland once you have done that slide the door panel up towards the top of the door and it should slide right off......also be aware of thedoor light dont forget to disconnect it also. Good Luck!
