|
#1
02-18-2008, 04:01 AM
Hummer Veteran
Join Date: Dec 2005
Posts: 36
Rattle fix
I am sure some of you guys have the common door panel and other rattles. What have you done to try and fix them? I did a search and found some different ideas but would like to get them in one thread. Thanks and please don't tell me to turn up the radio.
#2
02-18-2008, 04:23 AM
Hummer Veteran
Join Date: Jul 2006
Location: Tulsa, Oklahoma
Posts: 219
Re: Rattle fix
DYNAMAT.
Cost me about 500.00 and made the car SOOO much better!
__________________
Carless... riding the bus... 
Trying to decide on which 08 H2 to get
#4
02-18-2008, 07:24 AM
Elcova Rookie
Join Date: Feb 2008
Location: Coxsackie, NY
Posts: 8
Re: Rattle fix
i think i might try using this stuff inside the doors to see if it will expand enough to stop the rattling...
what do ya think?
http://www.touch-n-foam.com/
__________________
2003 Hummer H2 Vortec 6000 6.0, Air Susp Fully Loaded Pimper.
1991 Toyota Pickup 22re 4x4 3" body 5" susp 35x12.50's 150watt KC's 2.5" pacesetter, rancho steer/stab.
#5
02-18-2008, 05:33 PM
Hummer Novice
Join Date: Oct 2007
Location: Stanton CA.
Posts: 19
Re: Rattle fix
I use the spray armor all on all the places were the plastic pieces meet on the doors and inside panels. This lasts about 3-4 months before it needs to be done again. It takes away almost all the squeaks and creeks from the inside.
#6
02-18-2008, 10:18 PM
Hummer Expert
Join Date: Feb 2005
Location: new orleans
Posts: 506
Re: Rattle fix
DYNAMAT as much as you can!!!!!! That will completely eliminate the "rattle" if done right.
__________________
Maury Ballstein: I've got a prostate the size of a honeydew and a head full of bad memories.
03' White 2 Door H1 Pickup w/ 2in. body lift
05' BLACK SUT SLANTBACK Magnacharged w\ 12lb pulley, 6in. Fabtech lift, tierods, BUILT 4L80E tranny, 5.13 gears
66' VETTE STINGRAY
12' DODGE RAM 2500 CUMMINS 4X4 W/ FRONT & REAR LOCKERS
07' Z06
#7
02-19-2008, 05:16 PM
Hummer Veteran
Join Date: Sep 2006
Location: Ann Arbor, MI
Posts: 138
Re: Rattle fix
so has anyone figured out what it is caused by?
is it the door panel aginst the door?
is it the door panel clips in the holes?
what is it comming from?
#8
02-22-2008, 02:06 AM
Hummer Veteran
Join Date: Jul 2006
Posts: 127
Re: Rattle fix
ok... with BSR issues... first you need to see if its the panel against the door, or something inside the panel making the noise either to the panel or to the door... then you just nee to isolate it.... one good way is to use felt tape, foam tape or something like that.... if its a clip issue, which it could be, sometimes putting a tape called Ultra High Molecular Weight( (UHMW) tape over the hole and then putting the clips back in works well.... and no, UHMW tape isn't scotch tape, its actually a very very nice thing to use to make surfaces slick....
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 08:27 AM.
Linear Mode
