2006 H2 w/nav. Anyone done this and can tell me procedure.?
thibble
1. Open your center console and remove screws that hold the bucket in the console and console lid.
2. Remove shifter with torx bit and pull the shifter/cupholder bezel.
3. There are some bolts 10mm I think. That hold the plastic console to steel. They are under the console bucket and shifter bezel remove them.
4. Then there are 2 screws in the bottom of the center dash bezel remove them, then remove the upper 2 allens.
It's a pain. have fun lol
thibble
If you grind
this off you no longer have to remove the center console to remove the front cowling.
If someone has theirs off post a pic and I'll highlight the area that needs to be ground away.
_____________________________________
2006 HUMMER H2
MOOG Front End
Diablo InTune w/DiabLew Tune
Cognito Steering Support
OBX LT Headers
Air Raid Filter w/Tube
External Trans Cooler -Radiator Bypass
Corvette Servo
Rancho 9000 Adjustable Shocks-
Rancho Steering Stabilizer
20" Chrome Fuel Hostage - Cooper ST Maxx
Slotted Rotors/Ceramic pads/Steel Lines
Viper Smart Start
iPod/Video Interface
HID Head and Fog Lights
Optima Red Top w/ Priority Start Cut Off Mod
You could just as easily add a more stiff, thicker piece of foam where the middle console meets the face, OR it would be just fine if you weren't too picky.
I could snap photos of the fitment with and with out the remote so you all can see if you want.
_____________________________________
2006 HUMMER H2
MOOG Front End
Diablo InTune w/DiabLew Tune
Cognito Steering Support
OBX LT Headers
Air Raid Filter w/Tube
External Trans Cooler -Radiator Bypass
Corvette Servo
Rancho 9000 Adjustable Shocks-
Rancho Steering Stabilizer
20" Chrome Fuel Hostage - Cooper ST Maxx
Slotted Rotors/Ceramic pads/Steel Lines
Viper Smart Start
iPod/Video Interface
HID Head and Fog Lights
Optima Red Top w/ Priority Start Cut Off Mod
Thread Tools
Search this Thread
Display Modes
Posting Rules