They may be correct, if they splice the wires into the OEM wiring. However, go to your dealer and get the Z-82 Trailer Brake option and it gives you a plug-in interface connector with wires on the other end to connect the module to.
It cones with the Hummer Winching acc. kit from your dealer, or can be purchased seperately.
WARNING: this interface changed for 2006 models, so do not use the Z-82 option as the pin outs have changed. I had to take the Harness and remove the pins out of the connector and tone them out with my meter, then plug them back in new locations. This only affects 2006+ year models and dealers are not aware unless they call Hummer support!
__________________
H2 SUT 4.56 Gears, Front Locker, Cognito Pitman/Idler kit & Idler Pivot Kit, Fab Tech Tie Rods, True Tech Trailing Arms, Edelbrock Panhard Rod, PML rear Diff & Tranny Pans, Corsa Exhaust, Dynatech LT Headers, Diablo Predator Programmer, Volant CAI, Warn 9500 Winch, Escort 8500x50 & ZR3 Laser Shifter, Delta Light Bar, Rancho Steering Stabilizer & Bilstein Shocks, Ron Davis Radiator, PowerSlot Rotors, Hawk Brake Pads
|
11-30-2005, 10:01 PM
Posting Rules
Hybrid Mode