Moab Spring 2K6 Pics

[Alan06SUT]

I agree with phil that since the drivetrain and streering systems are separate, A stonger tie rod will not directly cause a CV shaft breakage. Most IFS CV shaft breakage I have seen was due to excess angles on the shafts (from improper lifts: a ZR2, or excessive throttle while flexed out: 2500 chevy). Both times tie rods were unaffected.

However, a stronget tierod could cause the center link to bend or break, but if you didnt have the stonger tie rod, the tie rod would have boken (under less strees) before the CL bends;

so IMO stonger tie rods = good for ALL IFS set ups.