Doodad Installation/Service Costs

[MarineHawk]

Okay, I can't post photos, but, now that I'm basically level, I assume the jounce bumpers should look about the same.
However, the point on my passenger-side jounce bumber is touching the control arm about 1 inch inside of the mark where it came from the factory. The point on my driver-side jounce bumper is pointing just a tiny bit to the OUTSIDE of that mark and is about 1/2" above the control arm (there is a 1/2" gap). What does that mean? Sounds bad to me, but I'm just guessing.