Did the torsion today

[westhillsat]

Originally Posted by NEOCON1

you need to jack up the front so tires are in the air . the adjustment bolts are under the truck about where the rear seats are . i am very happy with 2 turns , 3 will get you a lil more wind noise . there is a thread with pix someplace .

Glad I had the tire shop raise mine
Two times, like brother Neo

[NEOCON1]

right on brother west missin the moab

[blindzebra]

Anytime you do this, you do want to get the alignment checked. The toe in will be off and cause uoter edge tire wear. Just tell the dealer that it pulls to the left if you have less than 7500 miles on it and it's still free under warranty. As far as wind noise, I haven't noticed any difference, but I do have the halogens up there so there was always a little noise.

[usetosellhummer]

ok got it! I have a conection at the dealership so i will fill him in. Duh the the bars are for only the front!

[HummerNewbie]

Originally Posted by blindzebra

...if you have less than 7500 miles on it and it's still free under warranty...

Not if you changed out the tires. Found out the hard way

[Bully13]

I'm just gonna say this and I don't care who reads it or whatever the f**k they get out of it.

I'm really glad my wife and I got our Hummers. I don't really care to go down to a shop to have it modified. I think it's more fun to try and do stuff on your own to see what happens.

As for me, I am having a great time and this forum and it's really a lot of fun to be a part of.

So if that makes me stupid - broke - trailer trash - a dyke (lol) - or anything else... so be it.

[Anti-BlInG]

Agreeeeeeeed, home-made is best. Spray-cans, home depot, and imagination...it works wonders.

[NEOCON1]

Originally Posted by Anti-BlInG

Agreeeeeeeed, home-made is best. Spray-cans, home depot, and imagination...it works wonders.

right on brother

[Phil H.]

Oops. It's not as "easy" as I thought. To get the left hand spring hanger bolt out you have to drop the gas tank. Does anyone have access to a service manual? I'd hate to drop it and break something off.

Also, while I was crawling around under the H3, I noticed that while the part number for the two leaf springs are the same, they're also marked with an "L" or "R". On mine, the "R" is on the left and the "L" is on the right. Could someone else take a look at the bottom of their leaf springs and, if you still have the sticker on them, let me know if your "L" and "R" are on the correct sides? Drew, could yours be reversed too?

I live hundreds of miles from a dealer and can't look under new ones.

Thanks!

[Phil H.]

I just found out that the gas tank skidplate can be dropped without the gas tank coming with it and the tank has a molded clearance groove to remove the spring hanger bolt. Cool! I'll let you know what happened and if it really works that way.

[HummerNewbie]

Originally Posted by Bully13

I'm just gonna say this and I don't care who reads it or whatever the f**k they get out of it.

I'm really glad my wife and I got our Hummers. I don't really care to go down to a shop to have it modified. I think it's more fun to try and do stuff on your own to see what happens.

As for me, I am having a great time and this forum and it's really a lot of fun to be a part of.

So if that makes me stupid - broke - trailer trash - a dyke (lol) - or anything else... so be it.

You damn stupid broke ass trailer trash dyke!!!!