H2 HOOD HANDLES ON MY H3 :-0

[King Donkey]

what are those handles for? is it to open the hood panel and is there an opening there? thanks

[BACKNBLACK]

Just looks. In the H1 the Hood Handles are really Helicopter Transport Handles and on the H2 they truly are used to Pull open the Hood. The Hummer H3 lacked this feature. The H3 is just a snap on Hood panel, it has no true function :-(

[NEOCON1]

Originally Posted by BACKNBLACK

Just looks. In the H1 the Hood Handles are really Helicopter Transport Handles and on the H2 they truly are used to Pull open the Hood. The Hummer H3 lacked this feature. The H3 is just a snap on Hood panel, it has no true function :-(

x2 its a phoser panel

[dеiтайожни]

Detailed retrofit and installation instructions please. Do the hood handles come with mounting hardware?

[CO Hummer]

Oh great. Now H2 owners have to worry about their hood handles getting ripped off by 3bies. nice.

[BACKNBLACK]

Install was easy. Here is what you need to do.

1- Get (2) Black H2 Handles from your local dealer (FREE)

2-Take off your H3 Hood Panel

3- Grind off the mounting screws on the bottom of the H2 Handles.

4- Mark your H3 Panel for Drill and Drill your 4 Holes for the Handles
(2 Holes on each Side)

5- Install your handles by screws from the bottom with Drywall, Metal or wood screws.

6- The Top will be flush mount but the bottom will be raised a bit, I bought black silicone and filled in the gap to make it look flush.

7- Put the Panel Back on and you are done.

******INSTALL TIME IS LESS THAN 30 MINUTES******

[dеiтайожни]

thanks

[CO Hummer]

Originally Posted by BACKNBLACK

Install was easy. Here is what you need to do.

1- Get (2) Black H2 Handles from your local dealer (FREE)

2-Take off your H3 Hood Panel

3- Grind off the mounting screws on the bottom of the H2 Handles.

4- Mark your H3 Panel for Drill and Drill your 4 Holes for the Handles
(2 Holes on each Side)

5- Install your handles by screws from the bottom with Drywall, Metal or wood screws.

6- The Top will be flush mount but the bottom will be raised a bit, I bought black silicone and filled in the gap to make it look flush.

7- Put the Panel Back on and you are done.

******INSTALL TIME IS LESS THAN 30 MINUTES******

It looks good, but I think it would look better if you ground the front to a flush angle instead of using the silicone filler.

[DRTYFN]

Originally Posted by King Donkey

what are those handles for? is it to open the hood panel and is there an opening there? thanks

Where's that post about handles?

[usetosellhummer]

pass, sorry looks wierd to me

[frenzy1]

I think it's nice !

[BACKNBLACK]

Nope thats the gap you get. I used a black silicone to fill my gap. You would never notice it unless I pointed it out.

POst pics if you have them :-)

[H3.007]

Thanks for the tip. I may have to do that in the future, dependent upon the durability of the poly-foam. Did you just inject it underneath or did you use som type of mold? I thought that one could possible use a strong packing tape to surround the handle bottom. Then, through a small hole in the tape, an injection of this silicone could be administered. Sound reasonable?

Also, what is the VR stand for in your ADV H3 description?

[BACKNBLACK]

I used tape: VR is Victory Red

[frenzy1]

I like it !