H3 OEM Lower Grill Lights (available)

[cestwick]

Originally Posted by BuzzH3

Did you install them yourself? If so, how hard was it?

Yes I installed them myself. They are fairly easy to do and come with really good instructions...of course I am also a GM/Hummer Technician.

All the wiring is included and there are wires going through the firewall already. Hardest part is removing the front bumper and that is pretty easy.

[Webster1]

Is there a sperate switch for the lights? How do you turn them on and off or are they hooked to your head lights?

[Michael1]

Are these driving lamps? Do they come automatically with the high beam, or do you wire a switch into the dash?

Michael

[cestwick]

these are off road lights...same lights as used in roof mounted assy..There are holes in the center dash at bottom for the roof mounted and grille mounted light switches...these are completely controled by the switch..High/low beam doesn't metter...

[HummBebe]

These are great....mee likes.

[evldave]

Does anyone know how much these retail for?

[evldave]

Also, is there a separate switch for these or do they come on with the high beams?

[HummBebe]

Originally Posted by cestwick

these are off road lights...same lights as used in roof mounted assy..There are holes in the center dash at bottom for the roof mounted and grille mounted light switches...these are completely controled by the switch..High/low beam doesn't metter...

And here you go again

[wpage]

Originally Posted by cestwick

these are off road lights...same lights as used in roof mounted assy..There are holes in the center dash at bottom for the roof mounted and grille mounted light switches...these are completely controled by the switch..High/low beam doesn't metter...

Can these be tapped/used for non GM lights? If so could you explain how to access and splice in?

[cestwick]

Originally Posted by wpage

Can these be tapped/used for non GM lights? If so could you explain how to access and splice in?

The switches and wiring all come in a kit from GM. I know you can get switches seperate but not wiring. If you bought switches you could wire something up yourself, if you are doing after market lights you could still use the prerun wires going through the firewall. These wires go through the firwall at the harness and are taped back onto harness. For a nice clean easy install I recommend the factory grille lights.

[Groundpounder]

Like the look of them. I just won a lower grill w/lights, in chrome, on eBay. Total cost $149.95.

[Groundpounder]

[quote=cestwick]The switches and wiring all come in a kit from GM. I know you can get switches seperate but not wiring. If you bought switches you could wire something up yourself, if you are doing after market lights you could still use the prerun wires going through the firewall. These wires go through the firwall at the harness and are taped back onto harness.

I need to hook up a pair of Whelen strob lights in the front. Tapping into the power wire I can do, I hope, and put in another switch. Where is the spot to run the three wire cable, thru the firewall, to my control panel in the rear? Can you help with info?
PM me if you can. Thanks.