H3 Front Levelling Kit

[humdoug]

Originally Posted by NASCAR17

Save your money and turn the torsion bar like alot of us did.It works fine.

I did the torsion bolt adjustment months ago and it didn't get the front level with the back. I don't want to go beyond 2 1/2 turns.

I don't care about the cost for the kit or being the first in the forum to give it a try. If it don't work - back to 2 1/2 turns. Either way I'll post the results, dimensions and pics.

[Slammed Vette]

Please do!!! Like to see how it works out.You just doing the front?

[Ipedog]

I hope that you're doing front and rear. It should be interesting to see, although I do wonder about the u-joints...

[GotSandH3]

I really dont understand how that kit is any different then just turning in the bolts. Its still putting extra stiffness to the torsion which kills the ride quality and ball joints! Am I wrong?

[humdoug]

I contacted Truxxx and talked in detail. They explained this kit is different and it does not apply more pressure on the torsion bars and stated the torsion bolts only get a slight tightening. The bracket shown in the photo is used on the stock shocks. It moves them into a different position to eliminate wearing.

Truxxx indicated they have installed similar kits without problems.

If they don't work you will see the kit on e-bay under "paper weights".

[inked]

Hey check out this thread - I just posted an interesting article regarding tbars:

http://www.elcovaforums.com/forums/s...ad.php?t=18607

Worked for me and did speak with a few certified mechanics before tweaking them and all said the only thing that will happen to your H3 is a bumpy ride - but that's inevitable for any tweaks to your suspension.

Before tbar adjustment:


After adjustment:



After the tweak I can now fit LT315 75R16 MT/R with no problems at all:

[Slammed Vette]

Does the Truxx lift only do the front or is there something for the rear too?

[humdoug]

Originally Posted by inked

Hey check out this thread - I just posted an interesting article regarding tbars:

http://www.elcovaforums.com/forums/s...ad.php?t=18607

Worked for me and did speak with a few certified mechanics before tweaking them and all said the only thing that will happen to your H3 is a bumpy ride - but that's inevitable for any tweaks to your suspension.

After the tweak I can now fit LT315 75R16 MT/R with no problems at all:

How many turns did you make?