![]() |
Re: I have a problem - any suggestions
If you get under the truck, do any of the rubber boots on the halfshafts look like they have a problem? Any goopy piles of grease splattered around?
Where does it sound like it is coming from? i.e. front end, back end, left or right?
Does it sound like metal on metal, any clanging? Or just a dull thumping noise?
Drop me an email if you have more specific questions and are still looking for some input...
-Manny
-- Manny
-----------------------
/''T''|[___|___]
[---T--L -OlllllllO-]
()_)"""()_)/"**"\)_)
manny(at)serious4x4.com
http://www.serious4x4.com
Re: I have a problem - any suggestions
1999 AMGeneral H1 6.5TD BLACK Wagon e-Lockers Front and Back, Rubberduck4x4 RockTubes, Extended Undercarriage Protection,"Big Duck" 2" body lift/2 1/2" suspension lift, 41" IROK Radials on 17" Cepeks w/Rock Rims, (in process)Centered front diff, 3.08 gears, 12k Brakes and 12k halfshafts
Re: I have a problem - any suggestions
they can be purchased at a local autoparts store but need to be pressed on and premoved... just ask for one from a similar year / engine Chevy Pick Up.
Scott
'01 HMCO
Re: I have a problem - any suggestions
He said there was a bang, and then he couldn't drive anymore... if it was a carrier bearing, I would expect that to generate a lot of noise-- but a seized carrier bearing wouldn't halt his prop shaft to the point that he can't move the vehicle in "H" on the t-case unless he also broke something else, too!
-Manny
they can be purchased at a local autoparts store but need to be pressed on and premoved... just ask for one from a similar year / engine Chevy Pick Up.
Scott
'01 HMCO
-- Manny
-----------------------
/''T''|[___|___]
[---T--L -OlllllllO-]
()_)"""()_)/"**"\)_)
manny(at)serious4x4.com
http://www.serious4x4.com
Re: I have a problem - any suggestions
its been a while.... whats the outcome of this??
Scott
'01 HMCO
Re: I have a problem - any suggestions
Monday I will drag it in and get back to you - thanks to all for all the suggestions at least I will go in sounding as if I know what I am talking about.
Re: I have a problem - any suggestions
The right hand side halfshaft has dropped off of the diff plate - I mean the whole thing - all six bolts gone - no signs of shearing - all the holes are still threaded - all I have to do is bolt it back on - I think.
The laft shaft is still in place with no bolts backing out - wait the bolts couldnt back out - the brake caliper would hit them if they tried to come out - even stranger.
Anyway - I will bolt it back on and see what that does.
Thread Tools
Search this Thread
Display Modes
Posting Rules