Transmission options- supercharger

[mboard]

Dimitri,
Thanks for your assistance. I took the information to my dealer and he likes the idea. However his only concern is programming the computer with the 4L80E installed with Whipple. The company you referred to in posting did not have information on programming this set up. I will let you know what the tech says when he has more time to look into this. Any ideas?

[MDimitri]

Try going to this site: http://www.tunercat.com/tnr_desc/do_tc.html, see if they can recommend a ecm or eprom upgrade. Another avenue for your technician to have a look at is at http://www.hptuners.com/ or try doing a BIN search request at this site: http://www.horist.com/hptuner/ What your going to need is a Supercharged Vortec cal for a whipple with 4L80E tranny. A really good technical site you should have a look at is http://www.ls1tech.com/forums/ when you go here you will need to register in order to take advantage of ther forum. Good luck.

No I'm not a H2 Tech....but I did stay at a Holiday Inn Express last night!!

[obzidian]

the TCI trans controller is well designed at dealing with the 60e/65e/80e setups. You adjust EVERY parameter to make your setup perform right. TCC lock-up, line pressure, shift points, shift time delay, etc. it can get the job done and doesn't need to pigback the stock pcm, just runs the trans and that is it.

http://www.tciauto.com/electronics/index.htm

Ls1tech is a nice site, im usually there, i have a f-body and a cts-v, before trading her in for the H2.

Those trans will hold fine. I like this company, i have seen there trans hold up to a whole lot of abuse through the silverado i mentioned...

http://www.finishlinetrans.com/index.htm

this is there site, i would call and ask for chuck, really nice guy and should help you out with what you need. They can do the vacum mod if you wish, helps out with the feel of the trans...

good luck!!