Fabtech rods and tire pressure questions

[dochummer]

Are the instructions posted somewhere? I'll be installing the Fabtech TR's next week.

Originally Posted by PhilD

I just did one myself yesterday with a tape measure and it holds a line and drives perfectly. It is not difficult to do. I use a plump-bob and tape measure. You can get the toe damn close.

I've noticed with oversize tires that you can leave an alignment shop with the toe set badly, so do it myself.

20 psi is pretty much the standard for moderate wheelin' in a H2. Much higher and you really get very little benefit from airing down.

[mrmayhem]

Sweeet. I just got mine today and I'm itching to put them on.
Any alignment write ups would also be appreciated.. tips, advice.. etc.

[mrmayhem]

You da man.. thanks. Now to get the job done.

[dochummer]

Awsome Phil! Thanks