I need a favor from one of ya'll with a liftkit.

[PARAGON]

gotcha, just making sure.

I still say comb over the track bars and panhard bar to make sure no movement took place at somepoint.

After that, through up your hands in frustration

[OrangeCrush]

Originally Posted by PARAGON

gotcha, just making sure.

I still say comb over the track bars and panhard bar to make sure no movement took place at somepoint.

After that, through up your hands in frustration

Yeah, when I took the pic, it was still in there. In fact, I was in the process of removing it and if you look this pic, you can see that the nuts are loose. I started taking it off but thought I would take the pics first.


At the bottom of the pic, you can't see it but the two bolts in the crossmember are sitting in slotted holes. They are in the "up" (normal) position. I slotted them to lower the whole assy just to see if that would change anything.

Thanks,

Mark