 |
|
10-03-2006, 09:07 PM
|
|
Hummer Expert
|
|
Join Date: May 2006
Location: Johnstown, PA.
Posts: 553
|
|
Passenger Door Sill Rattle
Has anyone experienced a rattle near their H3's passenger door? The rattle in mine is eminating from under the plastic sill cover and it almost sounds like a loose nut or pebble inside, sliding back and forth during hard braking and acceleration. How does the plate detach from the metal portion of the seal? Perhaps I can locate the item making the noise to let everyone know in the event this is a common, unresolved issue.
|
10-03-2006, 10:16 PM
|
 |
Hummer Guru
|
|
Join Date: Sep 2005
Location: fort salonga ny
Posts: 3,789
|
|
Re: Passenger Door Sill Rattle
Quote:
|
Originally Posted by H3.007
Has anyone experienced a rattle near their H3's passenger door? The rattle in mine is eminating from under the plastic sill cover and it almost sounds like a loose nut or pebble inside, sliding back and forth during hard braking and acceleration. How does the plate detach from the metal portion of the seal? Perhaps I can locate the item making the noise to let everyone know in the event this is a common, unresolved issue.
|
My wife told me theres a rattle in passanger door.
I checked it out it was my sunglasses. 
Sorry im no help I thought it was funny  
__________________
H3 gray adventure,brushguard,hood handles,sunroof,steps,crossbows,smokers package,window/sunroof visor,Airbrushed spare tire cover,mudflaps,K&N filter,SS Hummer insert,Hummer rubber mats,cargo rubber mat + shade,12 volt airhorn,eclipse nav/dvd/rear camera/mini remote,autostart,12 volt fridge,high beam garage remote,underhood air compressor, taillight bezels ,clinometer ,trailer brake and hitch.
|
10-04-2006, 01:20 AM
|
|
Hummer Expert
|
|
Join Date: May 2006
Location: Johnstown, PA.
Posts: 553
|
|
Re: Passenger Door Sill Rattle
- I thought the same thing, regarding a foreign object of possession. Unfortunately, it wasn't that easy....
 |
10-10-2006, 02:56 AM
|
|
Hummer Expert
|
|
Join Date: May 2006
Location: Johnstown, PA.
Posts: 553
|
|
Re: Passenger Door Sill Rattle
I had a friend at a garage pull the sill plate for me today (he knew where the clips were). We foudn nothing- and the noise is still eminating from that area. Could it be something in the frame or rocker that has come loose?
|
10-10-2006, 02:56 AM
|
|
Hummer Expert
|
|
Join Date: May 2006
Location: Johnstown, PA.
Posts: 553
|
|
Re: Passenger Door Sill Rattle
I had a friend at a garage pull the sill plate for me today (he knew where the clips were). We foudn nothing- and the noise is still eminating from that area. Could it be something in the frame or rocker that has come loose?
|
10-10-2006, 10:40 AM
|
 |
Hummer Guru
|
|
Join Date: Jul 2005
Location: Idaho
Posts: 4,744
|
|
Re: Passenger Door Sill Rattle
Could be something in there. If it sounds metallic, run a magnet back and forth and see if you can hear it sliding. If so, take it to one of the holes and try and get out.
If too large, spray a little foam on it to hold in place, or take it to the dealer.
__________________
Black Sheep Hummer Squadron
(ME TOO)
|
10-10-2006, 01:17 PM
|
|
Hummer Expert
|
|
Join Date: May 2006
Location: Johnstown, PA.
Posts: 553
|
|
Re: Passenger Door Sill Rattle
Thanks f5! I'll try that. To me, it sounds like a screw or perhaps a small nut...
|
10-10-2006, 09:32 PM
|
|
Hummer Professional
|
|
Join Date: Jul 2005
Posts: 278
|
|
Re: Passenger Door Sill Rattle
Quote:
|
Originally Posted by f5fstop
If too large, spray a little foam on it to hold in place, or take it to the dealer.
|
Neat idea - I never thought of this! |
10-10-2006, 10:20 PM
|
|
Hummer Guru
|
|
Join Date: Jul 2005
Location: Idaho
Posts: 4,744
|
|
Re: Passenger Door Sill Rattle
Just normal insulating foam from Home Depot works great. I had a bolt in my Jeep that fell into the frame rail from the top and I tried for an hour to get it out through numerous holes. Just could not get it out through any of the holes. I went to Home Depot, purchased the foam, with a magnet got the screw right to the hole, foamed it to death, and the rattle was gone. 
You can also insert another screw through the hole to hold something in place.
To be honest, it was not my idea, but a union tech I had in TN who worked for me. He was the best tech I have ever met, and when he retired, we lost one of the best union people I have ever met. He had one of the best work ethics of anyone.
__________________
Black Sheep Hummer Squadron
(ME TOO)
|
10-20-2006, 06:20 AM
|
 |
Hummer Guru
|
|
Join Date: Jun 2006
Location: Out West
Posts: 2,539
|
|
Re: Passenger Door Sill Rattle
H3.007, did you ever find out what was making that rattle? If not, did you use f5fstop's suggestion of a magnet and foam? Just curious.
__________________
2008 H2 Graystone Metallic
2006 H3 Black (sold)
previously known as Hmmm3
|
11-02-2006, 03:50 AM
|
|
Hummer Expert
|
|
Join Date: May 2006
Location: Johnstown, PA.
Posts: 553
|
|
Re: Passenger Door Sill Rattle
Nah - not yet. That is on the list for this weekend.
|
11-02-2006, 08:42 PM
|
|
Hummer Expert
|
|
Join Date: May 2006
Location: Johnstown, PA.
Posts: 553
|
|
Re: Passenger Door Sill Rattle
Hey f5- are there plugs underneath the rockers so I can access the internal space for the magnet / foam trick?  |
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 04:17 AM.
|
