Where the heck is my engine compartment light?

[fourfourto]

Originally Posted by marin8703

i got one of these http://www.pfyc.com/pc/GN3007/VTUNDE...ood+Light.html .

Then i connected it directly to the battery (added fuse). Interupted the circuit with a pin switch mounted to the right of the radiator, over the driver head light. When the hood is opened the light goes on, when you close it the light goes off.

I might also put a manual switch in there to be able to turn the light off with the hood open during the day. Now that i think of it the light might have one built in, gotta check.

Thats the same one i was looking for but its new,I will save the link.

[fourfourto]

marin8703 Where did you mount it ,on the firewall or on the hood.
Did you use screws?.
I was thinking maybe using 3m double sided tape.
My friend has one on his blazer and I think there is a switch on it.

[jp's-h3]

Very nice!
ordered mine!

[marin8703]

Originally Posted by fourfourto

marin8703 Where did you mount it ,on the firewall or on the hood.
Did you use screws?.
I was thinking maybe using 3m double sided tape.
My friend has one on his blazer and I think there is a switch on it.

I put it on the hood. Used double sided tape, does a great job. looks pretty good too!

[fourfourto]

Thats what i was thinking I didnt want to drill holes . did you put it over the battery ?. Any pics

[marin8703]

Originally Posted by fourfourto

Thats what i was thinking I didnt want to drill holes . did you put it over the battery ?. Any pics

Its not exactly over the battery but it is in that location, i beleive a little further back and to the left, i'll look again tomorow morning. Sorry, no pic, but i'll try and post one by the end of the week.

Does anyone know if 3m double sided tape would have a problem with the heat under the hood. It seems to still be holding strong, but over time could it come off, could the heat make it come off quicker? I'll be checking on it every now and then to make sure its still there.

[fourfourto]

I have my garage remote device mounted with 3m on the side of the air box for a year ,it has'nt fallen off yet.

I want to mount mine near the battery and air compressor (on top of fuse panel) and dont want to stretch to far to get to it.

[fourfourto]

Originally Posted by marin8703

I put it on the hood. Used double sided tape, does a great job. looks pretty good too!

I just picked up a new one on ebay.
http://cgi.ebay.com/ebaymotors/ws/eB...m=160057988052

It has a suction cup and a magnet.$35.00 total with shipping


Any pics were you mounted it also hows the tape holding.

[marin8703]

i forgot that i said i'll post pics a long time ago, been a little busy with school. mine didnt come with a magnet but if it did i would have used that, would be easier to move around. The tape i used (3m double sided) seems to be hoding up pretty good, but when you kind of pull on it or bump it with something it doesnt seem sturdy, like it can come off, but it hasnt yet.

I mounted it by the battery a little back, kind of over the brake fluid, not over it but a little to the side. Tried to put it so it doesnt hit anything.

Also didnt want to put it far forward on the hood, because when im shutting it its gona feel alot more downward force at the front than near the back, which can cauze it to pop off.

sorry for the huge delay in a picture, it always slips my mind. ill try and remember to take a pic with the phone tomorow or as soon as possible.

how big is the magnet that is used, does it seem sturdy? i might get a magnet and glue it to the light or something.

[marin8703]

oh and by the way 35 bucks shipped is a pretty good deal.