RockRail Sliders Arrived.

[SR1355]

Just got UPS notice that rock rails are on their way.

Delivery date in 11/6, Monday, hopefully they'll show up on Friday. I taking the day off to build rear storage drawers. It'd be great to get a hold of these and install them Friday.

[SR1355]

My slides are in Hodgins, IL according tp UPS. Two days from Salt Lake City, that's pathetic, I make that drive from MI in 1 day, but then again I'm a little nuts. What is longest you have driven straight thru, My record is 34 hours. Left Jackson WY, drove to some god foresaken place in ID, turned around and all the way to Jackson, MI. Killer!!!!

[Crash ?]

It wouldn't matter if they had them on the truck driving up and down your street right now.. If the delivery date UPS has is Monday they will NOT deliver them until Monday..

I had a package shipped Ground to me a couple of years back via UPS.. It was shipped from Nashville to Memphis.. It showed sitting on the Memphis UPS docks for 3 days.. On the 4th day I called to check on it.. On the 5th day it showed back in Nashville and had NEVER made it to the Memphis hub.. On the 7th day it was on my doorstep..

Rob

[SR1355]

I know, if they where here in Jax at the local depot I could go and pick them up.

[Zoomie]

Hey Rob!

What part of Memphis are you from? We moved out here three years ago. Used to live near the corner of Kirby & Winchester. Hallshire Drive. Sure do miss the ribs!

I'm waiting for my rails, too. Hell, they haven't even charged my account, yet. I called, and the guy said something about demand outstripping production.

[SR1355]

Well, Rails arrived on Monday as scheduled. I went home to install them, got all the tools out. Unpacked everything and verified against parts list. Crawled under H3, wrestled rail into place. These things are heavy and built tough. Each one must weigh about 50# each. Went to install bolts shipped and found they are wrong size. Bolts provided where 12mm 1.0T and bolts needed are 10mm 1.5T, checked parts list and it said that 12 10mm 1.5T bolts are provided. Call Rocky with problem hoping to get new bolts orvernighted. The guy I talked to said that their parts list called for 12mm, they don't even have 10mm in the shop anywhere. I said I'm looking right at the parts list shipped with rails and it clearly indicates that 10mm was to be shipped. After five minutes going back and forth it sorry your on your own. So off to store to pick up right bolts, and back to house. Go to install first rail again get five of six bolts in but there is no way top front bolt is going in. It's aleast 1/8" off. On to other side and same problem, but a few other as well. This is driver side with emergency brake cable on frame rail. The rock rail was notched at first support for cable but not enough, at second support no notch so it deflects cable at bit, and a third support you have to unbolt brake cable support and remove to move cable out of way with no way to rebolt. This leaves cable flopping around with enough slack to end up in rear wheel. I can take care of this but that's not the point. Poor design, poor service, powder coat could be better, it will get scrached but that again is not the point.

They are installed now and look great. I'm sure they are well built and will take anything I can throw at them but they need to work on a few things for me to recommend them. I'll post pics later.

[tvguy]

Does anyone know the wall thickness of the tubing (i.e. .120 wall)?

[BuzzH3]

Originally Posted by SR1355

Go to install first rail again get five of six bolts in but there is no way top front bolt is going in. It's aleast 1/8" off. On to other side and same problem, but a few other as well. This is driver side with emergency brake cable on frame rail. The rock rail was notched at first support for cable but not enough, at second support no notch so it deflects cable at bit, and a third support you have to unbolt brake cable support and remove to move cable out of way with no way to rebolt. This leaves cable flopping around with enough slack to end up in rear wheel. I can take care of this but that's not the point. Poor design, poor service, powder coat could be better, it will get scrached but that again is not the point.

They are installed now and look great. I'm sure they are well built and will take anything I can throw at them but they need to work on a few things for me to recommend them. I'll post pics later.

How did you get the install finished if the bolt holes were off? I had similar problems. Wrong bolts, holes not lining up and bad design around the parking brake cable. I sent mine back.