Remote Starter / Alarm systems.

[H3.007]

Hi Marin,

Yeah, they did show me blank spots on the computer screen regarding the alarm bypass, but only after the fact as technically, the alarm still works.

I'll post the results of my inquest when I get them

[kodiakz]

As I have posted several times, the H3 is NOT an easy vehicle to do security/remote start on. It requires a combination of a bypass/integration module and wiring to bypass the passlock system. It can and should work correctly. If your installer can't get the assistance required from DEI, have them call Code alarm tech as they often help us when DEI cannot.

[H3.007]

Thanks Kodiakz - will do!

[aetherH3]

i called DEI about a month ago and asked them about the Valet 561R and they said that there were ZERO problems installing it on an H3. I know you have a Viper, but I thought i'd let you know that, FWIW. Tell us what the outcome is.

[H3.007]

Ok - update.

C.C. is telling me that there is no arm/disarm wire on the H3s. Thus, the only way to operate the alarm is with the factory remote.

And as some of you suggested, DEI was worthless in there technical assistance on the matter.

For those of you that have the systems installed, do you know how your installers worked out the arm.disarm issue.

The system I had installed was the 1400 XP.

[marin8703]

I actually posted this same question a little while back on this same theread, #25, but no one responded so I assumed no one knew.

I can tell you this. When the factory alarm is armed, and I use the viper remore to unlock, it does not disarm the factory alarm. However, when the factory alarm is armed, and I remote start the vehicle, the factory alarm automatically disables.

I think the remote starter disables it by the bypass that is supposed to be installed, but is not installed on mine. I have about 10 relays that do the job. Just by starting the vehicle without pissing of the passlock or whatever it is, the factory alarm disarms itself.

I think the H3 such as many other cars should have at least a factory alarm disarm, however it may not have an arm input.

[marin8703]

oh and also you might wana check out http://forum.ecoustics.com/bbs/messages/4/47.html , and post you questions there. its an alarm forum or something like that. theres some installers on there that may have installed your particular alarm and may be able to help. I got some good help from there a while back.