HELPP!!! Rocky Offroad Rails!

[yat74]

Don't worry, I installed mine by myself in the dark. It can be done. For the driver's side you need to bring the rail up from underneath the parking brake cables and slide the mounting brackets behind the cables (cables do not have to be removed). When I was alone I used 2 recycling bins to hold the rail up. Your wife may have a hard time as they are very heavy. Milk crates may also work well. Do not tighten the bolts all the way until they are all threaded in their holes. Start with the bracket to the rear of the vehicle and the top bolt hole then add one bolt to the top hole of the middle bracket and then do the front bracket top bolt hole (by far the hardest of all the bolts). With these three bolts loosely threaded you should be able the shimmy the bottom three bolts in relatively easily. Now tighten all of them up and you are ready to go. It may be difficult at first, it took me an hour in the dark by myself, just be calm and collected and use some TLC and it will work... good luck. I will be posting pictures tommorow of some of my addons.