After Installing new headlight lamps?

[K9sH3]

160 pounds???? Damn, I really need to lose some weight. I have exceeded that back in high school..

[H3 Hummer]

I re-alligned mine just like the manual and F5 said. To my surprise they actually were off quite a bit. Anywho...

Do the bright lights still work with your sylvania silverstars? I replaced my lights with Nyko bulbs. The have the fillament for the brights but they do not work.

I put the old ones in to make sure it wasn't a fuse or something.

[f5fstop]

I forgot add, before following that procedure, you will have to figure out the new height of the vehicle versus the stock height, and subtract that from the diagram used at 25 feet. This will bring the lights down to where they were prior to raising the vehicle; preventing the light from shinning in the back of a normal size car, and keep you from being flashed by oncoming traffic.

[yat74]

Originally Posted by H3 Hummer

I re-alligned mine just like the manual and F5 said. To my surprise they actually were off quite a bit. Anywho...

Do the bright lights still work with your sylvania silverstars? I replaced my lights with Nyko bulbs. The have the fillament for the brights but they do not work.

I put the old ones in to make sure it wasn't a fuse or something.

The silvertars are both low and high beams. Thanks Fstop.

[H3 Hummer]

Thanks!

[weiner703]

Sorry ahead of time if this is a dumb question, but if I just replace the head and fog lights with silverstars without changing the height of the truck, do I need to re-aim?

Thanks

[f5fstop]

I didn't and get no flashes.

[H3PAC]

I swapped out my headlights and fogs with SilverStars just before F5 did. Aim did not change and no other vehicles flashing me (except for the hot women who flash me all the time anyway )