VIBRATION NOISE

[Desert Dan]

My A pillar vibs too, right above my head at 70-80mph

I think I will put a dab of black silicone in there to keep it from vibrating.

[ChevyHighPerformance]

I removed the plastic window trim mouldings from either side of the windshield and used a heat gun to reform them so they fit flush against the windshield everywhere. My noise is coming from the rubber trim piece along the top of the windshield. The top lip of the moulding doesn't fit tight against the roof (maybe a few RCH clearance) and taps against the roof when going over 40 MPH.

[aflax24]

No No NO. Dealer is messing around. They will replace the A-Pillar trim, just insist. They did it for me and quite a few others on the forum. Just search around some, there are lots of post's on it. I got it done and they did both sides and no more eyebrow vibes...

[usetosellhummer]

Turn up the radio. after you do some real wheeling she really makes noise

[aetherH3]

i get the windshiedl rattle and a new one directly above my head in the headliner... and now another one that sounds like its coming from above the rear door behind me when the bass booms.

[Dani]

Originally Posted by aflax24

No No NO. Dealer is messing around. They will replace the A-Pillar trim, just insist. They did it for me and quite a few others on the forum. Just search around some, there are lots of post's on it. I got it done and they did both sides and no more eyebrow vibes...

I'm not sure if it's the A-Pillar trim on mine that needed fixed or not...but I insisted that the dealer fix it and fix it properly this time (this is the 4th time I've had it in for the same problem). I also refused to pick it up until it was fixed to my liking. I swear that the poor service guy hates me but he'll get over it. If not- I'm already over it.

[Hummer Kid]

When i push on the glove box it stops. i think it some where in the glove box. how do you tighten anything there to make it stop ?

[H3.007]

Not sure about tightening anything but I would first make sure you have nothing placed in there that is rattling (been there, done that). If that isn't the problem, I would then try to find the exact place where the rattling is occurring and place foam weather stripping (they seel it in grey and black) in that area, so long as it does not interfere with the proper opening and closure of the box. I had to do that in a car I once owned.