![]() |
Re: Anyone replaced headlights????
1. Reach into the gap, twist the fog lamp to disengage it from the housing, and pull lamp out of reflector.
2. Gently pull the lamp toward the bottom of the bumper so you can use two hands. The harness is barely long enough to reach.
3. Pull the harness's retaining clip away from the lamp base and unplug lamp from connector.
4. To install new lamp, plug it into the harness, look through the lens to line up the mounting slots and twist firmly into place.
2007 slate blue 5spd w/ adventure package. Still pretty much stock ... dammit
Re: Anyone replaced headlights????
1. Reach into the gap, twist the fog lamp to disengage it from the housing, and pull lamp out of reflector.
2. Gently pull the lamp toward the bottom of the bumper so you can use two hands. The harness is barely long enough to reach.
3. Pull the harness's retaining clip away from the lamp base and unplug lamp from connector.
5. To install new lamp, plug it into the harness, look through the lens to line up the mounting slots and twist firmly into place.
You forgot to say use rubber gloves when touching bulbs
H3 gray adventure,brushguard,hood handles,sunroof,steps,crossbows,smokers package,window/sunroof visor,Airbrushed spare tire cover,mudflaps,K&N filter,SS Hummer insert,Hummer rubber mats,cargo rubber mat + shade,12 volt airhorn,eclipse nav/dvd/rear camera/mini remote,autostart,12 volt fridge,high beam garage remote,underhood air compressor, taillight bezels ,clinometer ,trailer brake and hitch.
Re: Anyone replaced headlights????
You forgot to say use rubber gloves when touching bulbs
2007 slate blue 5spd w/ adventure package. Still pretty much stock ... dammit
Thread Tools
Search this Thread
Display Modes
Posting Rules