Batteries HELP

[Ground hawg]

while I remember under body protection is also VERY heavy. if your removing it on your own remove bolts from mid cross member (2 off). then the two side supports(8 off)4 per side, then loosen bolts on front cross member (cant remember if its 2 or 3).
at this stage im usualy under the cage support with floor jack and renove front c-member boltslower jack. front end will drop below c-member. to remove you need to move it forward about 2-3 inches. this thing weighs 40 lb+ so try to support both ends remember getting it back is harder. ive found the best way for me is to lay under it lift it with my legs and kick it back in.

Have fun. wish you had video so that i could see what I look like doin it


Ground hwg

[ssgharkness020147]

Good luck. And remember to disconnect the battery first, there is a hot wire going to the starter. Where are you getting a new starter from? FWIW Parts Hut in Hartland can get it for over 200.00 less then the dealer, just talk to Don he will set you up right.