got my check engine light this morning in traffic

[usetosellhummer]

I told you man, them telling you you can drive with that problum is bull.
If you get the light...
1. contact onstar
2. get conected to raodside assistance
3. get truck towed and you get a free rental

[wannabeH3]

well i have never had any starting issues or whatnot, it seems to have all of its power, altho i did notice that sitting at lights idling the motor will have just an almost unnoticable rough spot every 20 seconds or so. basically they said one of my cylinders is leaking, so it needs a new head, and to go ahead and drive it and they will give me a rental car when i bring it in for service.

Now as to opening a case, what do you mean by that? i called hummer yesterday and was talking to the guy and said "so i gotta get a new head and im worried this will happen in the future, where do we go from here" and he said i got the 4yr 50k warranty and if it happens again they will put a parts note on that part i guess and extend the warranty on that part. how do i get the extra coverage you guys are talking about? pm me if its best kept off the forum.

[RubHer Yellow Ducky]

[quote=wannabeH3]well i have never had any starting issues or whatnot, it seems to have all of its power, altho i did notice that sitting at lights idling the motor will have just an almost unnoticable rough spot every 20 seconds or so. basically they said one of my cylinders is leaking, so it needs a new head, and to go ahead and drive it and they will give me a rental car when i bring it in for service.

Now as to opening a case, what do you mean by that? i called hummer yesterday and was talking to the guy and said "so i gotta get a new head and im worried this will happen in the future, where do we go from here" and he said i got the 4yr 50k warranty and if it happens again they will put a parts note on that part i guess and extend the warranty on that part. how do i get the extra coverage you guys are talking about? pm me if its best kept off the forum.

PLEASE NO, TELL US ALL GIVING SPECIFIC ANSWERS AND EXAMPLES.

[fourfourto]

You must call hummer consumers relations, 1 866 4866376 they will need vin # dealers name and delivery date and mileage.that will start the case file .Within a day or two a manager will call you about the case.I did it with the brake grown and it was closed after the reginal rep said it was normal .
With the head issue they will extend warranty(at least thats what I read here)
Good luck

[Hmmm2]

Originally Posted by fourfourto

With the head issue they will extend warranty(at least thats what I read here)
Good luck

I had the cylinder head replaced not too long after I bought my H3, but they wouldn't give me anything as a warranty extension. They said, "It's fixed and you won't encounter the problem again." The Service Mgr said they had several H3's in for the problem, so they were aware of what needed to be done. Thankfully I haven't had the problem come back (at least not THAT one ..lol). That was about 1.3 years ago.

[Mike E]

I've witnessed 3 head jobs on H3's in our shop so far. We have 3 techs that can have it done in less than 2 days. It's pretty ugly looking when they get it all apart put the new head assembley drops right in on top of the block and they put everything back to gether. It wouldn't bother me one bit if I had to have this done to mine.

We have allowed customers to drive thier H3 until the new head arrived. The tech clears the codes and changes the timing a bit so the engine runs smooth. Hasn't caused a problem yet.

[HummBebe]

Originally Posted by Mike E

I've witnessed 3 head jobs on H3's in our shop so far. We have 3 techs that can have it done in less than 2 days. It's pretty ugly looking when they get it all apart put the new head assembley drops right in on top of the block and they put everything back to gether. It wouldn't bother me one bit if I had to have this done to mine.

We have allowed customers to drive thier H3 until the new head arrived. The tech clears the codes and changes the timing a bit so the engine runs smooth. Hasn't caused a problem yet.

That's brilliant....did you catch this "M" ???

[f5fstop]

Originally Posted by usetosellhummer

I told you man, them telling you you can drive with that problum is bull.
If you get the light...
1. contact onstar
2. get conected to raodside assistance
3. get truck towed and you get a free rental

We have a company vehicle that has been running for about 7K now, with the cylinder head issue. I know a few who have traveled well over 3K with the cylinder head issue. So, it appears some can.

As for cutoff. The new cylinder head for the 3.5L went into production March 31, 2006. So, vehicles with engines built after that date would have the new cylinder head. However, the plant could have had some of the older engines on site so I do not have a VIN cutoff for vehicles.

Originally Posted by f5fstop

As for cutoff. The new cylinder head for the 3.5L went into production March 31, 2006. So, vehicles with engines built after that date would have the new cylinder head. However, the plant could have had some of the older engines on site so I do not have a VIN cutoff for vehicles.

F5, There are small white sticky bar coded labels all over the truck, hidden away in the dash, and on parts of the chasis indicating the date and various times for different items. One example wasn't really secured so I pulled it off and kept it in my file for reference.
It says, " D8X 00503671 3/27/2006 12:41:32 PM Commodity: Steering Column" .
I am guessing that this was the Build date for my truck, and the various times indicate when that componnent was installed on the line?

Based on this, I must have an old style head. Should this be a concern? Is the problem wide enough spread that there may be a recall for the '06 Heads?

My last eight are ...68282011

[NEOCON1]

25,308 miles here and alls well . its an early build too

[Demo]

14500 miles, got it off the truck Feb 06, only one out of at least a hundred at the dealer without chrome.

They hadn't had a chance to do it yet.

[CrisB]

Originally Posted by NEOCON1

25,308 miles here and alls well . its an early build too

Sorry, Neo, but you're still at risk...

Took my H3 in today for a tire rotation & full checkup before heading out West next month, dealer called & said they read error messages, my head's gone. They said I had a valve hanging, sounds like worn guides.

Built July of 2005, I got 41000 mi & thought I may be safe.

Good news? I can have it back tomorrow. Sweeeeet.

[NEOCON1]

engine/transmission System [+] Diagnostic: Complete. No action needed.


so far so good this was my latest diagnostic keepin my fingers crossed



just wondering how everyone drove their trucks during the brakin period ???

i drove the **** out of mine i broke her in hard

[HummBebe]

Originally Posted by NEOCON1

engine/transmission System [+] Diagnostic: Complete. No action needed.


so far so good this was my latest diagnostic keepin my fingers crossed



just wondering how everyone drove their trucks during the brakin period ???

i drove the **** out of mine i broke her in hard

Same here....had to train the tranny to drive my way

[PackerFever]

Originally Posted by NEOCON1

just wondering how everyone drove their trucks during the brakin period ???

i drove the **** out of mine i broke her in hard

5 speed + Mountain driving and off road the first week.....keeping fingers crossed after 38,000 miles.