Whats this sound?

[Carbine]

Get an Ohm meter (DVOM) and read the cold start solenoid for resistance. Check for volts DC and Amperage. You should have enough Amps to drive the solenoid. The light load advance does nothing but advance the fuel sooner and stops advancing as soon as you apply pressure on the fuel pedal. If it didn't you would have one heck of a loud knocking noise.

[HUMTECH]

Lift pump, When noise is no longer there your gonna need A new one. Should hear it run with key on for maybe A minute and when key is off it will run for maybe 2-5 sec. Just open the hood and hold the pump while someone turns the key on and you can tell. You can check lift pump pressure if you have A gauge, or inside the drivers side front wheel well you will find A valve right at the firewall for draining water from the fuel bowl, simply open the valve and turn the key on, if fuel spills lift pump is operating.

[leenigen]

Yeah, it was the lift pump. I changed it a few weeks ago and everythings been fine since.