Re: Cooling issues...
Mark
Shrouds are needed for sure. It is strange the cooler stat did not help so i would ask for a trade and still go with 160 stat. You can of course test it in a pan of water on the stove but, that would not mean it will not malfunction the next time.
The best fan setup yet is getting the electric fan setup of the GM HD pickup trucks. They even match the place to hang on crossbar but, you just have to drill holes in shroud on top to match factory holes. They will also allow you with a tune tap into rigs computer to turn the fans off and on. I have been able to hot lap my H2 during tuning and other tests without the rig heating up in any runs.
Shroud is needed though. Good luck!! You may be able to use fans you have and just buy the HD shroud to mount over fans you have. The HD shrouds actualy hold the motors etc. but, You may find a shroud that will still mount in the same way and maybe probem solved. Worth a look anyway.
TAZ
__________________
05 H2 SUV cus. paint, Magnuson SC 6/12lb boost, cowl hood scoop, 12" dash touchscreen, GM elec. fans, HPTuners.com tuning soft., Dynatech headers dual catback exhaust Jet Hot chrome front to back Flowmaster Super 40's, Diamo 8 Karat rims & 325X60-20" Toyo, 4 OEM Captain seats Katzkins leather, rear console computer inside running all AV/NAV etc., Infinity component system 3 amps Tsunami Caps, rear flip down 12" monitor, headrest monitors, overhead console boost, fuel pressure, & A/F ratio gauges
|
06-26-2007, 07:50 AM
Posting Rules
Threaded Mode