SUT mods

[flyin6]

Originally Posted by tomp

he Cognito 2500Hd kit does fit the H2, it's just not in the H2 section . However, if you look at the kit for 2500Hd it does say Hummer H2.

It also allows more downward travel by relocating the stop, provider cushion on the stop, and puts it in factory alignmnet specs all at the same time!

I emailed Cognito on this question.
Their response stated that the 4"-6" 2500HD kit does not fit the Hummer. They did not go on to explain why, only that it would not fit.

So, I'm looking for a kit that allows the use of the stock wheels that wll give me 4" to 6" of lift and increased wheel travel. I think, no matter which kit I get, I will add the cognito UCA's and wort with the poly travel limiters to gain max down travel with the added lift.

I see that one member with a RC uses stock wheels, although the Rough Country web site says the wheels will not fit, hmmm. Superlift will work but is more costly and uses a bunch of brackets, and lowers the Torsion bars (into harms way). I'm also wondering which kits require another front driveshaft. Bought those before , and they get spendy pretty quick!

[tomp]

Sorry, I got confused & thought you wanted this: http://cognitomotorsports.com/store/page36.html

[flyin6]

Originally Posted by tomp

Sorry, I got confused & thought you wanted this: http://cognitomotorsports.com/store/page36.html

No problem.
I will, however, add that UCA to whatever kit I buy. That way I get both increased gound clearance amd increased travel. From what I can see, all these lift kits do is just what the name says. They do not increase suspension travel which is FAR more important. All you could do is safely get into a little deeper water with just a lift kit.

[tomp]

Our main goal should be to get the "tallest" tire we can fit in there without rubbing. Wider tires are nice for increased traction, but can limit flex/travel when you get into a situation where they hit the outer fender etc. I don't care much for a 6" lift - just to go up another 1/2" or so in tire size and at the same time raises the center of gravity

Personally, I am just going to tweak the stock setup as far as it will go to keep the factory warranty and get 37s underneath