Help Please... Would like to work on my H2 Rig

[jmsspratlin]

Originally Posted by Dan D 2

Go to superbrightleds.com. They have all kinds of LED's. The interior lights are #194. The LED replacement is WLED-WHP at $4.95ea.

Here is the link....http://www.superbrightleds.com/cgi-b...gi?product=CAR

Did not replace the overhead console lights yet. I removed the lens but could not get at the bulb. It was late and figured I'd check it out when I get the rest of the interior bulbs in.

Thanks alot. I'm not sure if you have seen the interior lights in the new caddys, but this is pretty similar. They are very bright, and not that yellow tinted bright either.

[Dan D 2]

Be careful with the LED turn signal lamps....at least the ones that are on the WEB site I stated above. I plugged one in on the rear and my turn signals started flashing real fast. I then put another one on the front and it blew the turn signal and parking lamp fuse. At least on the Hummer, I think you'll have to add the load resistor shown on that site. The regular incandescent bulbs are brighter so at least for the turn signals, I'll stick to the originals.

[jmsspratlin]

Originally Posted by Dan D 2

Be careful with the LED turn signal lamps....at least the ones that are on the WEB site I stated above. I plugged one in on the rear and my turn signals started flashing real fast. I then put another one on the front and it blew the turn signal and parking lamp fuse. At least on the Hummer, I think you'll have to add the load resistor shown on that site. The regular incandescent bulbs are brighter so at least for the turn signals, I'll stick to the originals.

I'm just doing the inside lights to get away from the "dingy" yellow