STAINLESS STEEL LIGHT BAR ALL FABBED UP

[hilljob]

FIRST OFF,ITS A BITCH TO WELD STAINLESS WITH A MIG,BUT THEY LOOK GOOD,THE STEEL ONES LOOK ALOT BETTER,ANYWAYS,I DIDNOT DRILL A HOLE FOR WIRING BUT YOU COULD DO THAT OR I COULD IF YOU LET ME KNOW.I DONT DRILL A HOL;E UNLESS I NEED TO

[Big Dad]

Originally Posted by hilljob

FIRST OFF,ITS A BITCH TO WELD STAINLESS WITH A MIG,BUT THEY LOOK GOOD,THE STEEL ONES LOOK ALOT BETTER,ANYWAYS,I DIDNOT DRILL A HOLE FOR WIRING BUT YOU COULD DO THAT OR I COULD IF YOU LET ME KNOW.I DONT DRILL A HOL;E UNLESS I NEED TO

Dude no need to scream, I am knowledgeable about welding stainless...I also know it's a bitch...and just wondered about the hole since all of my tools are in Alaska. Your welds are far superior to mine...especially since I haven't played with welding since I retired from the Air Force back in 2000. The other question I had was concerning the diameter of the bar...what diameter is the stainless?

[hilljob]

sorry,im a hunt and peck kinda guy and never realize its that way until i have everything on there,then i dont feel like rewriting it.anyway,the bar is 1 1/2 inch .120 wall tubing

[Big Dad]

I really like the way that turned out. I figure drilling oversize holes and installing rubber gromets would be the way to go. Like I said, don't pay no attention to the knuckleheads.

[tower]

Exactly which measurements would you need off an H2? I'll get my calipers out!

[hilljob]

already told you in another post

[Big Dad]

Originally Posted by Iluvgettinghummers

Those welds look like the end of my pencil after a month in BANGCOK.

HAHAHAHAHA! The Fishbowl baby!

You mean after a night at the New Cleopatra Massage!

I'll take #12 and #17 and #23!

[hummer_metal]

Welds? Those are welds? I thought those were pieces of bubble gum stuck all around there.

Sloppy mig work no doubt, grab a tig and make love to the metal. If your going to use 316 SS which is correct, try buy it at a local scrap yard. I bought many pieces that were once boat covers and turned them into new things.

Your on to something, but your price is out of this world. I can put these out for 175.00 bucks easy, even charge a 15 dollar polish fee for the peeps that want polished.

BTW or FYI, preheat 316 prior to mig, you can use dynabrade to get the brushed look back. Or if the number 7447 meansw anything to you.

Just a suggestion is all.

You better get busy, the winter months are slow around these parts. I might need the money and decide to produce these myself. You can produce them for much cheaper, you know it and so do I.